User`s manual

User’s Manual
62
• ALARM ACTION
The alarm actions include PRESET, SEQUENCE, AUTOPAN and CRUISE
functions. Select one of these modes so that certain action will be executed
when an alarm is triggered. Use the right direction key of the control
keyboard to select a particular action mode, and the items listed below will
change in accordance with your selected alarm action. Additionally, when
an alarm is triggered, there will be a flash warning notice: ALARM displayed
in the upper right corner of the screen.
• PRESET POINT
Select a preset point where the Dome Camera should go when an alarm pin
is triggered. The preset point(s) should be set prior either in the PRESET
setup menu or through the keyboard.
SEQUENCE LINE
Select a sequence line that the Dome Camera should execute when an
alarm pin is triggered. The sequence line(s) should be defined prior either in
the SEQUENCE setup menu or through the keyboard.
AUTOPAN LINE
Select an auto-pan line that the Dome Camera should execute when an
alarm pin is triggered. The auto-pan line(s) should be defined prior either in
the AUTOPAN setup menu or through the keyboard.
CRUISE LINE
Select a cruise line that the Dome Camera should execute when an alarm
pin is triggered. The cruise line(s) should be defined prior either in the
CRUISE setup menu or through the keyboard.
Normal Open
Alarm In
Normal Close
Alarm In