User`s manual

User’s Manual
60
while at value <13>, the camera comparatively tends to stay in B/W mode.
IR COLOR
When the IR function is removed, the video output can be programmed as
color or B/W (black and white). The color here refers to simulate color, not
real color. This function is only applicable in IR ON mode.
Exit
Exit the IR function menu and go back to the MAIN PAGE 3 to carry on
setup of alarm setting.
S3/S4/S5/S6 Model
• AUTO
The Internal circuit will automatically decide the occasion to remove the IR
cut filter according to the value of light condition calculated by the internal
light algorithm. The options include <LOW>, <MID> and <HI>. <LOW>
indicates a higher sensitivity and can improve reliability of lens so that it is
easier to switch to Day mode and relatively difficult to change into Night
mode; while <HI> indicates that it is easier to switch to Night mode and
difficult to change into Day mode.
• MANUAL
IR MANUAL ON
Select the item to remove the IR cut filter; the camera will be in B/W (Night)
mode.
IR MANUAL OFF
Select the item to attach the IR cut filter; the camera will be in Color (Day)
mode to disable the IR function.
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
ALARM DETECT OFF
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES