User`s manual

User’s Manual

NOTE: Users could execute the cruise function through a keyboard.

Please refer to the control keyboard’s quick guide for further

information.

3.3.16 HOME SETTING

Users are able to set an operation mode to ensure constant monitoring. If the

Dome Camera idles for a period of time, the selected function will be activated

automatically; this is the HOME function. The HOME function allows constant

and accurate monitoring to avoid the Dome Camera idling or missing events.

• HOME FUNCTION

The item is used to enable or disable the HOME function. Use the left/right

direction keys of the control keyboard to change the setting.

• SELECT MODE

Select one of the modes that the Dome Camera should execute when the

HOME function is enabled and the RETURN TIME expires. The options

include <AUTOPAN>, <SEQUENCE>, <CRUISE> and <PRESET>. Use the

left/right direction keys of the control keyboard to change the setting, and

the items below will change in cooperating with your selection.

• PRESET POINT

Select a preset point where the Dome Camera should go after the Return

Time function, which will be mentioned later, is activated. The preset point(s)

should be set prior either in the PRESET setup menu or through the

keyboard.

MAIN PAGE 2

ID DISPLAY ON

TITLE DISPLAY OFF

TITLE SETTING 01

PRESET ENTER

SEQUENCE ENTER

AUTOPAN ENTER

CRUISE ENTER

HOME SETTING ENTER

HOME SETTING

HOME FUNCTION OFF

SELECT MODE PRESET

PRESET POINT 001

RETURN TIME 001MIN.

GO ENTER

EXIT YES