User`s manual

User’s Manual
55
3.3.15 CRUISE
CRUISE is a route formed with manual operation, through adjusting pan, tilt
position and zoom parameters, which can be stored and recalled to execute
repeatedly.
• CRUISE LINE
Up to eight sets of Cruise routes can be created for one camera. Using
LEFT/RIGHT direction keys to select a line first and then follow the steps
below to start recording the Cruise route.
• RECORD START
Follow the description below to record the CRUISE path.
1. Rotate the Dome Camera to a desired view area (for some protocols,
users may need to do it before entering the OSD), and press <ENTER>
to build the cruise path using the joystick on the control device. The
percentage of the memory buffer used will be displayed on the screen.
2. Pan, tilt and zoom the Dome Camera to form a path.
NOTE: Beware of the memory size when building a cruise path.
Once the buffer percentage reaches 100%, recording of the path will
stop.
• RECORD END
The cursor will be moved to RECORD END while building the Cruise route;
when the setting is completed, press <ENTER> to save the route.
• RUN CRUISE
After cruise setting is completed, press the <CAMERA MENU> key
(ENTER) to run the defined Cruise path.
• EXIT
Exit the CRUISE setup menu; go back to the MAIN PAGE 2 to carry on
setup of Home Setting.
CRUISE
CRUISE LINE 1
RECORD START ENTER
RECORD END ENTER
RUN CRUISE ENTER
EXIT YES