User`s manual

User’s Manual
54
• DIRECTION
The item is for setting the AUTOPAN direction of the Dome Camera. The
Dome Camera will start to pan clockwise from the start point to the end point
if your selection is <RIGHT>, and then return to the start point. The camera
will start to pan anti-clockwise from the start point to the end point if your
selection is <LEFT>. Refer to the diagram below.
• SPEED
The item is for defining the Dome Camera rotation speed while running
Auto-pan. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.).
• RUN AUTOPAN
After all setting related to auto-pan are completed, select this item to
execute the Auto-pan function. Press the <CAMERA MENU> key (ENTER)
to run an Auto-pan path.
• EXIT
Exit the AUTOPAN setup menu; go back to the MAIN PAGE 2 to carry on
setup of Cruise.
NOTE: Users could execute the auto-pan function through a
keyboard. Please refer to the control keyboard’s quick guide for
further information.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER
LEFT
(anti-clockwise)
RIGHT
(clockwise)
Start Point
End Point
Dome Camera
RIGHT LEFT