User`s manual

User’s Manual

• SPEED

Users can set the pan/tilt speed of the Dome Camera from one sequence

point to the next one, and the range of setup speed is from 1 to 15. Within

the range, PAN speed varies from 10 ~ 400 (degree/sec.), and TILT speed

varies from 8 ~ 400(degree/sec.).

• DWELL TIME

The DWELL TIME is the duration time that the Dome Camera will stay at a

sequence point, and the range is from <0> to <127> seconds. The Dome

Camera will go to the next sequence point when the DWELL TIME expires.

If the setting is <0>, the Dome Camera will stay at this sequence point for

less than 1 second and then shift to the next point

• RUN SEQUENCE

Users can command the Dome Camera to run the selected sequence line

manually. Press the <CAMERA MENU> key (ENTER) to execute a

sequence line.

• EXIT

Select the item to exit the SEQUENCE menu; go back to the MAIN PAGE 2

to carry on setup of Auto-pan.

NOTE: Users could execute the sequence function through a

keyboard. Please refer to the control keyboard’s quick guide for

further information.

MAIN PAGE 2

ID DISPLAY ON

TITLE DISPLAY OFF

TITLE SETTING 01

PRESET ENTER

SEQUENCE ENTER

AUTOPAN ENTER

CRUISE ENTER

HOME SETTING ENTER