User`s manual

User’s Manual

3.3.12 PRESET

• PRESET SET

Totally 256 preset points can be set. Follow the steps below when in the

preset setting menu.

STEP 1: Press the right/left key on the keyboard to select a number (001

represents preset point 1, 002 represents preset point 2, etc.)

STEP 2: Press the <CAMERA MENU> key (ENTER) on the keyboard, and

then move the Dome Camera to a targeted shooting area/point.

STEP 3: Press the <CAMERA MENU> key again to save the defined preset

point.

Once completing setup of a preset point, users could move the cursor to the

next item to run the preset point.

• PRESET RUN

Press the <CAMERA MENU> key (ENTER), and the camera will go to the

appointed point. To run other defined preset point, simply press the right/left

key on the keyboard, select the preset point that you want to go, and press

the <CAMERA MENU> key (ENTER) again.

• EXIT

Exit the PRESET menu and go back to the MAIN PAGE 2 to carry on setup

of Sequence.

NOTE: Users could set preset points through a keyboard. Please

refer to the control keyboard’s quick guide for further information.

MAIN PAGE 2

ID DISPLAY ON

TITLE DISPLAY OFF

TITLE SETTING 01

PRESET ENTER

SEQUENCE ENTER

AUTOPAN ENTER

CRUISE ENTER

HOME SETTING ENTER