User`s manual

User’s Manual

3.3.9 ID DISPLAY

Press the direction key down to turn the MAIN MENU page from 1 to 2, and then

the menu item <ID DISPLAY> will be shown on the top. Users are allowed to

choose whether the Dome Camera’s ID will be displayed on screen for

identification. For more information, please refer to 2.4 ID Setting.

• ON

Display the ID address of the selected Dome Camera on the right bottom of

the screen.

• OFF

Hide the ID address of the selected Dome Camera.

3.3.10 TITLE DISPLAY

Users are allowed to name a view area, where the title will be displayed on

screen for easy recognition.

• ON

Select <ON> to display the title set for a view area on screen while the

camera shooting the view area.

• OFF

When TITLE DISPLAY is set <OFF>, no title will be displayed on screen

even titles have been set in advance.

3.3.11 TITLE SETTING

Up to 16 zone titles can be set with maximum 20 characters for each title.

Follow the steps to set a camera title.

STEP 1: Operate the Dome Camera to a view area where you want to set a title

for it.

STEP 2: Turn on the OSD and go to the MAIN PAGE 2 to select <TITLE

SETTING>.

STEP 3: Select a number to represent the view area.

STEP 4: Press the <CAMERA MENU> key (ENTER) on the keyboard to go into

the editing page.