User`s manual

User’s Manual
46
• PASSWORD (S3/S4/S5/S6 Model)
The administrator can activate OSD Password function for security
concerns. Once the function is turned on, users are required to enter the
password every time when accessing to the OSD menu. The Password
setting menu is shown below:
The password setting procedure is like the following:
STEP 1: Choose a number with direction keys and then press the
<CAMERA MENU> key (ENTER) to input. For example: <0>
<CAMERA MENU>, <1> <CAMERA MENU>, <2> <CAMERA
MENU>, <3> <CAMERA MENU>.
PASSWORD: 0123
STEP 2: In the second line, enter the same password again to confirm the
setting.
STEP 3: Move the cursor to <SAVE> and press <CAMERA MENU> to
save the setting.
STEP 4: Move the cursor to <EXIT> and press <CAMERA MENU> to exit
the password setting page.
If OSD Password function is enabled, when press the <CAMERA MENU>
key to enter the OSD menu, the password request message will be
displayed as shown below. Please enter the password, press <ENTER>
and then access to the OSD main menu.
NOTE: When first time turning the Password Function on, please
enter the Master Passport to setup the new password.
The Master Password: 9527.
PLEASE ENTER PASSWORD
_ _ _ _
0123456789
DELETE ENTER EXIT
NEW PASSWORD:: _ _ _ _
CONFIRM PASSWORD:: _ _ _ _
0123456789
DELETE SAVE EXIT