User's Manual

DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing Amber The battery charge might be low. Connect the AC
adaptor to recharge the battery.
If it still flashes amber, it indicates a problem with
the computer. Disconnect the AC adaptor for
several seconds, and then reconnect it. After
that, press the power button. If it still does not
operate properly, you should contact your
reseller or dealer.
Amber Indicates that the AC adaptor is connected and
the battery is charging.
White Indicates that the AC adaptor is connected and
the battery is fully charged.
No light Under any other conditions, the indicator does
not light.
If the battery pack becomes too hot while it is being charged, the charge
stops and the DC IN/Battery indicator goes out. When the temperature of
the battery pack falls to a normal range, charging will resume. This process
occurs regardless of whether the computer's power is on or off.
Power indicator
Check the Power indicator to determine the power status of the computer.
The following indicator conditions should be noted:
White Indicates that the computer is turned on.
No light Under any other conditions, the indicator does
not light.
User's Manual 3-9