User Manual

Using SRD with DSSS (Direct
Sequence Spread Spectrum) and
other than FHSS wideband
modulation.
1. Maximum EIRP density is 2 mW/
MHz. Maximum 100 mW (20
dBm) EIRP is permitted to use.
2. Maximum EIRP density is 20m
W/MHz. Maximum 100 mW (20
dBm) EIRP is permitted to use
with the following condition:
It is permitted to use SRD for
outdoor applications only for
purposes of gathering telemetry
information for automated
monitoring and resources
accounting systems or security
systems.
3. Maximum EIRP density is 10
mW/MHz. Maximum 100 mW (20
dBm) EIRP.
Indoor applications are permitted
to use.
Ukraine: Limited
implementation
EIRP =100 mW (20 dBm) with built-in
antenna’s maximum gain is 6 dBi.
User's Manual 7-9