User Manual

When connecting an AC Adaptor to the Port Replicator, use only the
AC Adaptor included with Port Replicator. Do not use the computer’s
AC Adaptor.
Refer to the Port Replicator’s User's Manual for more details.
To dock your computer in the Port Replicator, do the following:
1. Align the top left and top right corner of your computer to the C’ mark
on the Port Replicator.
2. Press down on the back of the computer until it clicks into place. The
computer connector on the port replicator engages the computer’s
docking port.
When the computer is connected, the Docked light on the Port
Replicator glows green while the computer is powered on.
Figure 4-20 Aligning your computer with the Port Replicator
1
1. Docking port (computer)
Product appearance depends on the model you purchased.
Make sure the AC adaptor is always connected to the Hi-Speed Port
Replicator III 180W/120W while in use. Otherwise the Port Replicator will
stop working, possibly resulting in data loss.
Some models support multiple display function if equipped with a Hi-Speed
Port Replicator III 180W/120W.
The port replicator supports a maximum of two external displays. For each
VIDEO panel, only one port can function at a time.
User's Manual 4-40