User Manual

Universal Serial Bus
(USB 2.0, 3.0 or 3.2
Gen1) port
One or two Universal Serial Bus ports, which
comply to the USB 2.0, 3.0 or 3.2 Gen1 standard,
are provided on the left side of the computer.
The USB 3.2 port is compliant with USB 3.2
Gen1 standard and backward compatible with
USB 3.0 and 2.0 devices.
USB Type-C™ (USB
3.1 Gen1) port
One Universal Serial Bus port, which complies to
the USB 3.1 Gen1 standard, is provided on the
left side of the computer.
USB Type-C™ (USB3.1 Gen1) port supports
USB 2.0 with theoretical maximum transmission
rate at 480Mbps and USB 3.1 Gen1 (DC5V,
900mA) with theoretical maximum transmission
rate at 5Gbps. This port supports only the USB
data transmission.
Some models are equipped with a USB Type-
C™ (USB 3.1 Gen1) port.
Note that it is not possible to confirm the operation of all functions of
all USB devices that are available. Some functions associated with a
specific device might not operate properly.
Before removing a USB device from the USB port, click the Safely
Remove Hardware and Eject Media icon on the Windows Taskbar,
and then select the USB device that you want to remove.
Keep foreign metal objects, such as screws, staples, and paper clips, out of
the USB port. Foreign metal objects can create a short circuit, which can
cause damage and fire, possibly resulting in serious injury.
Headphone/
Microphone jack
A 3.5 mm mini headphone/microphone jack
enables connection of a monaural microphone,
stereo headphones, or a headset.
Smart Card slot This slot allows you to install a Smart Card
device.
Some models are equipped with a Smart Card
slot.
Optical disc drive The computer is configured with a DVD Super
Multi drive.
Some models are equipped with an optical disc
drive.
User's Manual 3-3