User Manual

Consult with your system administrator about configurations of the AMT
function before connecting to a network.
Disable the AMT function
Intel
®
AMT function is enabled by default, and in a situation where no
system administrator is available, it is strongly recommended that you turn
off the AMT function before connecting to a network.
If the AMT function is NOT turned off, there is a danger that the
management of AMT function will be abused by other parties which
possibly lead to the leak of sensitive and/or proprietary information,
data loss, HDD/SSD erasure, or file overwritten.
To disable the AMT function, do the following:
1. Turn on the computer while pressing the F2 key.
2. On the dynabook Setup Utility screen, select MEBx -> Intel(R) ME
Password, and enter the default password “admin” in the password
field.
User's Manual 7-16