User's Manual PORTEGE X30W-K Series
Table of Contents Chapter 1 Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks .............................................. 1-1 Regulatory Information ......................................................................... 1-2 Video Standard Notice ........................................................................ 1-10 OpenSSL Toolkit License Issues ....................................................... 1-10 FreeType License Issues ................................................
Memory media ..................................................................................... 4-17 HDMI™ out port ................................................................................... 4-20 Wireless WAN device .......................................................................... 4-21 GPS Function ....................................................................................... 4-22 USB Type-C™ Adapters ......................................................................
Chapter 1 Legal, Regulatory, and Safety This chapter states the legal, regulatory, and safety information applicable to your computer. Copyright, Disclaimer and Trademarks Copyright © 2022 Dynabook Inc. All Rights Reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Dynabook Inc. No patent liability is assumed, with respect to the use of the information contained herein.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby Atmos is a trademark of Dolby Laboratories. Wi-Fi is a registered trademark of Wi-Fi Alliance.
Thunderbolt™ 4/USB Type-C™ port. Changes or modifications made to this equipment, not expressly approved by Dynabook or parties authorized by Dynabook could void the user’s authority to operate the equipment. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
EU Declaration of Conformity This product is carrying the CE mark in accordance with the related European Directives. Responsible for CE marking is Dynabook Europe GmbH, Stresemannallee 4b, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on the website https://emea.dynabook.com/product-conformity. CE compliance Hereby, Dynabook Europe GmbH declares that the model(s) described in this manual is/are in compliance with Directive 2014/53/EU.
Any consequences resulting from the use of this product in working environments that are not verified/recommended are not the responsibility of Dynabook.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Following information is only valid for EU member states: Information requirements Regulation EC 1275/2008 Additional information as required by Regulation (EC) 1275/2008 amended by Regulation (EU) 801/2013 implementing European Ecodesign Directive with regard to requirements for standby, off mode and networked standby electric power consumption of electrical and electronic household and office equipment can be found here: http://emea.dynabook.com/environment.
Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
Following information is only for Turkey: Disposal of products: The crossed-out wheelie bin symbol means that this product should not be collected and disposed of with other household waste. When the product becomes waste at its end of life, to protect environment and human health, it should be given to the nearest collection, recycling or disposal center.
Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO.
5. 6. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit" [http://www.openssl.org].
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'.
-------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'. As you have not signed this license, you are not required to accept it.
ENERGY STAR® Program Your computer model may be ENERGY STAR® compliant. If the model you purchased is compliant, it uses the ENERGY STAR logo and the following information applies. Dynabook is a partner in the ENERGY STAR program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.
commitment, visit: http://us.dynabook.com/company/corporate-social-responsibility/sustainability General Precautions Your computer is designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual.
Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. It also includes information on work space design, posture, and lighting that can help reduce physical stress. Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm.
Moving the computer While the computer is designed for flexible day-to-day usage, you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation. Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel.
Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.
Chapter 2 Getting Started This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by Dynabook, some of the features described in this manual might not function properly. You might not have all the software mentioned in this manual depending on the model you purchased. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Click Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once. Right-click Click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen. Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice. Start The word "Start" refers to the " center of the Windows taskbar.
Opening the display To open the display panel, slowly lift it with one hand holding the center of the display panel (as shown in the following figure) and the other hand holding the palm rest down so that the main body of the computer is not raised. Figure 2-1 Opening the display panel 1 1. Display panel Product appearance depends on the model you purchased. Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut might damage the computer.
Figure 2-2 Opening the display panel to any angel Clamshell mode Flat mode Tablet mode User's Manual 2-4
Do not put your fingers in the gap near the display hinge. Do not put your finger in the gap between LCD panel and bottom of your computer. Keyboard and Touch Pad are temporarily disabled when you operate the computer in tablet mode. It is suggested that you hold the center of the display panel while rotating the display panel. Before carrying or transporting your computer, make sure to close the display panel. Never transport your computer in tablet mode.
Never plug the AC adaptor into a power source that does not correspond to both the voltage range and the frequency specified on the regulatory label of the unit. Failure to do so might result in a fire or electric shock, possibly resulting in serious injury. Always use or purchase power cables that comply with the legal voltage and frequency specifications and requirements in the country of use. Failure to do so might result in a fire or electric shock, possibly resulting in serious injury.
Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. 2. 3. Plug the power cord into a live wall outlet. Connect the DC output plug of the AC adaptor to the Thunderbolt™ 4/ USB Type-C™ port on your computer. The DC IN/Battery indicator glows. You can also establish connection through the USB Type-C™ adapter (provided with some models). Refer to the USB Type-C™ Adapters section for more information. Figure 2-5 Connecting the DC output plug to the computer 1 2 1.
Figure 2-6 Turning on the power 1 1. Power button Product appearance depends on the model you purchased. Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen. When it is displayed, be sure to read the license terms and license agreement carefully.
Also, you can create custom desktops so that running apps can be grouped for entertainment, productivity, or what you just want. To do this, click the Task view icon , and then click New desktop. Open the apps you want to use on that desktop. To switch between desktops, click Task view again. Search Search on the Windows taskbar allows you to find apps, files, settings, and more on the computer. When internet connection is available, it also shows you the best search result from the internet.
Sign-in options Windows offers a number of sign-in options including Password ( ), PIN ( ), Fingerprint ( ), Face ( ) and Picture password ( ) authentication to prevent from unauthorized access. If you have multiple sign-in methods set for a user account, you can select an option on the Windows login screen by clicking sign-in options. It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection.
Press CTRL, ALT, and DEL simultaneously (once) to display the menu window, and then select Restart by clicking the power icon ( in the lower-right corner. ) Before restarting the computer, be sure to save your data. Sleep Mode If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode, data is maintained in the main memory of the computer.
Restores the previous working environment more rapidly than the Hibernation Mode feature. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature. Allows the use of the panel power off feature. Executing Sleep Mode You can enter Sleep Mode in one of following ways: Click Start -> (Power) and then select Sleep. Close the display panel. Note that this feature must be enabled within the Power Options.
Saves data to the internal storage drive when the computer automatically shuts down because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. Allows the use of the panel power off feature. Starting Hibernation Mode To enter Hibernation Mode, click Start -> Hibernate.
System Recovery There is a hidden partition allocated on the internal storage drive for the System Recovery Options in the event of a problem. You can also create recovery media and restore the system.
1. Select either blank disc or USB Flash Memory. The application allows you to choose from a variety of different media onto which the recovery image can be copied including disc media and USB Flash Memory. Some of the disc media might not be compatible with the optical disc drive connected to your computer. You should therefore verify that the optical disc drive supports the blank media you have chosen before proceeding.
3. 4. 5. Hold down the F12 key and then release this key just after the computer is powered on. Use the up and down cursor key to select the appropriate option from the menu according to your actual recovery media. A menu is displayed from which you should follow the on-screen instructions. If you have previously chosen to remove the recovery partition without creating Recovery Media, the Recovery Media cannot be created.
Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section. Handle your computer carefully to avoid scratching or damaging the surface. Front with the display closed The following figure shows the front of the computer with the display panel in the closed position.
Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer. DC IN/Battery indicator The DC IN/Battery indicator shows the condition of the DC IN and the battery charge status. White indicates that the battery is fully charged while the power is being correctly supplied from the AC power adaptor. Refer to the Power Condition Descriptions section for more information on this feature.
Right side The following figure shows the right side of the computer. Figure 3-3 The right side of the computer 1 1. Memory media slot 2. SIM card slot* 2 3 4 5 4. Power button 5. Universal Serial Bus (USB 3.2 Gen1) port 3. Power indicator * Provided with some models. Product appearance depends on the model you purchased. Memory media slot This slot lets you insert a micro SD™/SDHC™/ SDXC™ memory card. Refer to the Memory media section for more information.
Note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly. Before removing a USB device from the USB port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, and then select the USB device that you want to remove. Keep foreign metal objects, such as screws, staples, and paper clips, out of the USB port.
Figure 3-5 The underside of the computer 1 2 2 1. Cooling vents 2. Stereo speakers Product appearance depends on the model you purchased. Cooling vents The cooling vents help the processor to avoid overheating. Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.
Figure 3-6 The front of the computer with the display panel open 4 1 2 5 3 5 6 7 8 9 9 14 14 10 11 15 12 13 15 1. Infrared LED* 2. Web Camera (user facing) 3. Web Camera LED (user facing) 4. Web Camera Shutter 5. Microphones 6. Display screen 7. Camera (world facing) 15 15 9. Display hinges 10. Keyboard 11. Fingerprint sensor* 12. Touch Pad 13. Touch Pad control buttons 14. Wireless communication antennas (Wireless LAN) (not shown) 15.
Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens and LED. Failure to do so might reduce image quality, possibly resulting in recognizing faces incorrectly. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens and the LED if it becomes dirty. It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection.
Do not point the camera directly at the sun. Do not touch or press strongly on the camera lens. Failure to do so might reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens if it becomes dirty. Camera (world facing) is designed for operating the computer in tablet mode. The captured image might be 180 degrees rotated while operating in other modes. Display hinges The display hinges allow the display panel to be positioned at a variety of easy-to-view angles.
Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, refer to the Legal Footnotes section. Magnets location Please read the following information before using the computer.
The computer contains magnets that might interfere with pacemakers, defibrillators, or other medical devices. If you wear a pacemaker, keep separation between your medical device and the computer. If you suspect that the computer is interfering with your medical device, discontinue use and consult your physician for information related to your specific device. The marked areas in the preceding illustrations show the location of magnets.
Video RAM The memory in the graphics adaptor of the computer, used to store the image displayed on a bitmap display. The amount of Video RAM available depends on the system memory of the computer. Graphics Processing Unit Graphics Processing Unit (GPU) performance might vary depending on product model, design configuration, applications, power management settings and features utilized.
Flashing Amber The battery charge is low. The AC adaptor must be connected to recharge the battery. Amber Indicates that the AC adaptor is connected and the battery is charging. White Indicates that the AC adaptor is connected and the battery is fully charged. Flashing White Indicates a problem with the computer. Disconnect the AC adaptor for several seconds, and then reconnect the AC adaptor. After that, press the power button.
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Operating in Tablet Mode When operating the computer in tablet mode, observe the following instructions. Figure 4-1 Operating the computer in tablet mode Remove all external peripheral devices and their connection cables from the computer before carrying. Remove the AC adaptor from the computer when using it held in your forearm.
Figure 4-2 Rotating the computer sideways 2 1 1. Landscape mode 2. Portrait mode To manually disable the automatic screen orientation, do the following: 1. 2. Click the Notification center icon on the Windows taskbar. Click Rotation lock so that the automatic screen orientation is currently disabled. When operating the computer in clamshell and flat mode, however, the automatic screen orientation is locked, and stays in Landscape mode.
Rotate Put two or more fingers on an item and then turn your hand to rotate things in the direction you turn your hand. Only some items can be rotated. Slide Drag your finger on the touch screen to move through what is on the screen. Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: shows your widgets. Swipe from the right edge: opens the Notification center.
Pinch or stretch Place two fingers down on the Touch Pad and move them toward each other (pinch) or away from each other (stretch). This shows different levels of information or visually zooms in or out. Two-Finger Scroll Place two fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. This allows you to operate the scroll bars of a window. Three-Finger Tap Tap once on the Touch Pad with three fingers together to open Windows Search.
Using the Stylus Pen Some models are equipped with a Stylus Pen. You can use the Stylus Pen to execute actions and enter data. Hold the Stylus Pen in a natural position, and tap, press, or trace on the screen lightly. Figure 4-3 Stylus Pen 1 2 3 4 1. Pen cap 2. Pen clip 3. Side buttons 4. Pen tip Pen cap Provides protection to the pen tip. Pen clip The pen clip allows you to insert the pen into suitable places.
Observe the following precautions on the handling of the Stylus Pen. To avoid damages to the display screen, refrain from doing anything other than the specified operation methods. Failure to do so could cause a malfunction or characteristic deterioration. Do not tap or press the Stylus Pen forcefully against the display as this could damage the Stylus Pen and the screen itself.
Dynabook is not liable for any problems arising on the products due to the use of the Stylus Pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users. Installing the battery Install the battery before using the Stylus Pen. Figure 4-4 Installing the battery Always use the proper battery (AAAA dry cell battery). Other batteries have different voltage and terminal polarities.
Drag Touch the screen with the Stylus Pen. Without lifting the Stylus Pen, drag it across the screen to select text or objects. Drag and drop Touch the screen with the Stylus Pen to select an object. Without lifting the Stylus Pen, drag it across the screen. Lift the Stylus Pen to drop the object to a new location. The thickness and/or width of drawing lines are changing in response to pen pressure level. The harder the pen is pressed, the thicker and/or wider is the drawing line.
The Keyboard The number of keys available on your keyboard depends on which country/ region your computer is configured for, with keyboards being available for numerous languages. There are different types of keys, specifically typewriter keys, function keys, Windows special keys, and the keypad overlay. Never remove the key caps on your keyboard. Failure to do so might damage the parts under the key caps. Keyboard indicator The following figure shows the position of the CAPS LOCK indicator.
Key Combination Function FN + F3 Switches the system to Sleep Mode. FN + F4 Turns the Microphone mute on or off. FN + F5 Changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. FN + F6 Decreases the brightness of the display panel in individual steps. FN + F7 Increases the brightness of the display panel in individual steps. FN + F8 Turns the Airplane Mode on or off.
Key Combination FN + Z ( ) Function Toggles the mode of the keyboard backlight between Timer, On, and Off. To set up the brightness, click Start -> All apps -> dynabook Settings. Click Keyboard tab, and select a level under Keyboard Backlight Brightness Control. To set up the timer, launch the dynabook Setup Utility, select PowerManagement -> Keyboard Backlight Control Mode, and select TIMER. Adjust the timer under Backlight Lighting Time. This function is supported with some models.
Figure 4-7 Using the fingerprint sensor 1 1 1. Fingerprint sensor Fingerprint cannot be used in models that do not have a fingerprint function. Total fingerprints which can be registered are 10 pcs per account. Points to note about the Fingerprint Sensor Be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.
Avoid the following finger conditions for enrollment or recognition as they might result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate: Soaked or swollen finger, for example as might occur after taking a bath Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate: Enroll two or more fingers.
Care and use of the battery pack This section provides the important safety precautions in order to handle your battery pack properly. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Charge the battery pack only in an ambient temperature from 5 through 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate, and the battery life might be shortened.
Be aware that the charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you are using the computer. If you make heavy use of external devices for example, the battery might scarcely charge at all during operation. Note that charging time will vary depending on the ambient temperature, the computer's internal temperature, and how the computer is being used.
Monitoring battery capacity Remaining battery power can be monitored using the following methods: Clicking the battery icon on the Windows Taskbar Via the Battery Status in the Windows Mobility Center window Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the battery pack and then calculate the remaining operating time, based on this together with the current power consumption.
Battery type Sleep Mode Shut Down Mode Battery pack about 5 days about 25 days (53 Wh, 4 cell) Be aware that the battery pack exhausted time is affected if there are any external devices connected. Extending battery life To maximize the life of your battery pack, do the following at least once a month: 1. 2. 3. 4. 5. Turn off the computer's power. Disconnect the AC adaptor and turn on the computer's power. If it does not turn on, then go to Step 4.
Figure 4-8 Example of memory media (microSD card) Points to note about the memory media card microSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or play back protected material on another computer or other device, and you cannot reproduce any copyrighted material except for your personal enjoyment. The supported maximum capacity of memory card is 512 GB.
For more details on using memory cards, see manuals accompanying the cards. Inserting memory media The following instructions apply to all types of supported media devices. To insert memory media, do the following: 1. 2. 3. Turn the memory media so that the contacts (metal areas) face down. Insert the memory media into the memory media slot on your computer. Press the memory media gently until it clicks into place. Figure 4-9 Inserting memory media 2 1 1. Memory media slot 2.
3. 4. Push the memory media until you hear a click to partially release it. Grasp the media and remove it. If you remove the memory media or turn off the power while the computer is accessing the memory media, you might lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer might become unstable or data in the memory media might be lost.
The system is shutting down. When you unplug the HDMI™ cable and replug it, wait at least 5 seconds before you replug the HDMI™ cable again. Settings for display video on HDMI™ To view video on the HDMI™ display device, be sure to configure the settings, otherwise you might find that nothing is displayed. Be sure to select the display device or audio device before starting to play video. Do not change the display device or audio device while playing video.
6. Insert the SIM card tray into the SIM card slot, and push the center of the tray to close it. Press gently until it locks into place. Figure 4-11 Installing the SIM card 4 Nano SIM 3 1 2 1. SIM card slot 2. Slender object (diameter 0.8 mm) 3. SIM card tray 4. SIM card Product appearance depends on the model you purchased. Only Nano-SIM card can be used in this computer. Never allow metal objects, such as screws, staples and paper clips, to enter the computer.
The performance of GPS varies depending on the environment. Failure to pinpoint a location might happen. Your current location might not be shown depending on the status of GPS or the location. If you are obtaining your current location information from the computer, your current location might not be detected due to the information accuracy.
USB-C™ to VGA/LAN Adapter This adapter provides: USB Type-C™ port (Power Delivery Charging), RGB monitor port, and LAN jack. Figure 4-12 USB-C™ to VGA/LAN Adapter 1 2 1. USB Type-C™ port (Power Delivery Charging) 2. RGB monitor port 3 3. LAN jack The output resolution of RGB monitor port on this adapter is up to 1920 x 1200 @60Hz. The USB Type-C™ port (Power Delivery Charging) on this adapter is used for connecting an AC adaptor only. USB data transmission is not supported by this port.
4. Connect the USB Type-C™ adapter to the Thunderbolt™ 4/USB Type-C™ port on your computer. Figure 4-13 Connecting the AC adaptor via USB Type-C™ adapter 3 4 2 1 USB Type-C™ adapter appearance varies depending on the model you purchased. RGB monitor port An external analog monitor can be connected to the RGB monitor port on the USB Type-C™ adapter. To connect an external analog monitor, do the following: 1. 2. 3. 4.
When displaying desktop on an external RGB monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size). In this case, read the manual of the monitor and set the suitable supporting display mode at the monitor. Then it will be displayed in suitable size with correct aspect ratio.
Do not connect any power supplying device to the LAN cable that is connected to the LAN jack. Otherwise, malfunctions or damage might occur. 1. 2. Connect the USB Type-C™ adapter to the Thunderbolt™ 4/USB Type-C™ port on your computer. Plug one end of the cable into the LAN jack on the USB Type-C™ adapter. Press gently until you hear the latch click into place. Figure 4-15 Connecting the LAN cable 1 2 3 4 1. Thunderbolt™ 4/USB Type-C™ port 2. USB Type-C™ adapter 3. LAN jack 4.
2. 3. Click Wireless display or dock. Your computer starts searching for the wireless display device. After the wireless display device is searched, follow the on-screen instructions to finish connection. After the connection is established, the name of the wireless display device appears under Devices. To disconnect the Wireless display device, click the wireless display device name and then click Remove device.
AC Adaptor If you frequently use your computer at more than one site, it might be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to carry the adaptor with you always. USB Type-C™ Adapters You can purchase different types of USB TypeC™ adapters as accessories from Dynabook. Please contact your reseller or Dynabook dealer regarding which type is available in your region.
If the microphones are not built in, you can connect an external microphone instead. 1. 2. 3. 4. Click Start -> All apps -> Windows Tools and double-click Control Panel. Click Hardware and Sound -> Sound -> Recording. Select Microphone Array or External Microphone, and click Properties. On the Levels tab, move the Microphone Array or External Microphone slider to increase or decrease the microphone volume level.
If the microphones are not built in, you can connect an external microphone instead. Device advanced settings This tab allows you to choose the type of headphone or microphone and select devices when an external device is plugged in. To choose the type of headphone or microphone, do the following: 1. 2. 3. Plug a headphone or microphone into the headphone/microphone jack. Click the Device advanced settings tab. Select one from the device list under ANALOG for the device you plugged into.
Chapter 5 Utilities and Advanced Usage This chapter describes the utilities and special features of this computer, and the advanced usage of some utilities. Utilities and Applications This section describes the pre-installed utilities that come with the computer and details how to start them. For further information on their operation, refer to online manual, help files, or README.TXT file (if applicable) of each utility.
eco Utility This computer is equipped with "eco Mode". This mode slightly lowers performance of some devices to reduce electric power consumption. You can realize measurable power savings by using it continuously. eco Utility helps control the power consumption of your computer. It also provides information that can help you understand your degree of contribution to the preservation of the environment. The utility also supports "Battery Charge Mode".
When the Power Off and Charge function is enabled, USB bus power (DC 5V) is supplied to compatible ports even when the computer is powered OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC 5V). As for the specifications of the external devices, contact the device manufacturer or check the specifications of the external devices thoroughly before use.
Always use the USB cable that was included with your USB device. Function under Battery Mode This option can be used to enable/disable Power Off and Charge under battery mode. It also displays the remaining battery capacity. Move the slider to enable or disable this function. Enabled Enables Power Off and Charge function under battery mode. Disabled Enables Power Off and Charge function only when the AC adaptor is connected.
USB port without "Power Off and Charge function" or disable both “System ON CDP Charge Mode” and “Power Off and Charge function”. System Password The System Password tab allows you to set a password in order to restrict access to the computer. Two levels of password security are provided: User and Supervisor. Passwords set by the System Password function are different from the Windows password. User Password To set a user password, click Start -> All apps -> dynabook Settings -> System Password.
Owner String (text box) You can use this box to associate text with the password. After you enter text, click Apply. When the computer is started, this text is displayed together with the prompt asking you to enter a password. If you forget your HDD User Password, Dynabook will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE.
some features that can power on the computer automatically (Task Scheduler, etc.) might not work. You must turn the computer back on to retry password entry.
To access this utility, click Start -> All apps -> dynabook Screen Rotation Utility. The following options might be provided: Screen Rotation—Rotate the screen orientation by using the Ctrl + Alt + Up arrow/Down arrow keys. Confirmation message—Show a confirmation message when the screen is rotated. External display message—Show a message when the screen did not rotate because an external display is connected.
To maintain a stable experience of the camera effects during video conferences, it is recommended you connect to a stable network, plug in the AC adaptor, close any other applications that are not in use and do not enable all camera effects at the same time to save CPU resource. Camera effects are intended for online meeting use. Please turn off the camera effects if they do not work as expected in other applications. Please turn off all camera effects before you uninstall the utility.
If you select the deletion method and continue with the operation, you will lose all data (including the operating system and recovery partition) on the internal storage drives. Make sure that you have already created recovery media if you want to use the computer after erasing your hard disk drive(s). Special features The following features are either unique to Dynabook computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
Panel power on/off *1 This feature automatically turns power to the computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in the Power Options. Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode Mode *1 and shuts itself down. This can be specified in the Power Options.
Chapter 6 Troubleshooting Dynabook has designed this computer for durability, however, should problems occur, you are able to use the procedures detailed in this chapter to help determine the cause. You should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place. Problem-solving process If you observe the following guidelines, resolving problems will be much easier.
Check all cables to ensure that they are correctly and firmly attached to the computer - loose cables can cause signal errors. Inspect all connecting cables for loose wires and all connectors for loose pins. Check that your disc media is correctly loaded. Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to Technical Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.
Hardware If you cannot find a software problem, you should then check the setup and configuration of your hardware. First run through the items in the preliminary checklist as described previously, then, if you still cannot correct the problem, try to identify the source. The next section provides checklists for individual components and peripherals.
Verify that the computer is on by looking at the Power indicator. If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the DC IN/Battery indicator. If the indicator is glowing, the computer is connected to a live external power source.
Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer automatically shuts down to prevent any damage. In this instance, all unsaved data in memory is lost. Problem Procedure Computer shuts down automatically Leave the computer off until it reaches room temperature. If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact Technical Support.
Problem Procedure If the battery is completely discharged, it will not Battery does not charge when the AC begin charging immediately. In these instances, wait a few minutes before trying again. If the adaptor is attached battery still does not charge, check that the power outlet of the AC adaptor is connected to its supplying power. This can be tested by plugging another appliance into it.
BIOS Problem Procedure Computer cannot be Disconnect the AC adaptor for several seconds powered on and then reconnect the AC adaptor. After that, press the power button. If it does not work, press the power button twice again. If it still does not work, press and hold the power button for 18 seconds. Real-Time Clock (RTC) information might be cleared if the power is turned on by pressing the power button. You should set the system date/time manually in dynabook Setup Utility.
Problem Procedure Markings appear on the computer's display panel These marks might have come from contact with the keyboard and Touch Pad while the display panel has been closed. Try to remove the marks by gently wiping the display panel with a clean dry cloth or, if this fails, with a good quality LCD screen cleaner. In this latter instance, you should always follow the instructions with the screen cleaner and always ensure that you let the display panel dry properly before closing it.
Problem Procedure You cannot read a file Check to ensure that the required file is actually on the memory media card that is inserted into the computer. If you are still unable to resolve the problem, contact Technical Support. Pointing device If you are using a USB mouse, you should also refer to both the USB mouse section and the documentation supplied with your mouse. Touch Pad Problem Procedure Touch Pad does not work Check the device settings.
USB mouse Problem Procedure Mouse pointer does not respond to mouse operation In this instance, the system might be busy.Try moving the mouse again after waiting a short while. Remove the mouse from the computer and then reconnect it to a free USB port in order to ensure that it is firmly attached. Double-clicking does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. 2. 3.
Fingerprint sensor Problem Procedure Fingerprints cannot be registered or deleted 1. 2. 3. 4. 5. 6. 7. Save your work. (Power) and then select Click Start -> Restart. Hold down the F2 key and then release this key just after the computer is powered on to show the dynabook Setup Utility. Select Security -> BIOS Password -> Supervisor, and then register the Supervisor Password. (If the User Password has been registered, clear it first.) Select Clear Fingerprint data, and then press Yes.
Problem Procedure Power Off and Charge function cannot be used Power Off and Charge function might be disabled. Enable the Power Off and Charge function under USB Charge within the dynabook Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC 5V) supply might be stopped for safety reasons. When this happens, disconnect an external device if some external devices are connected.
Problem Procedure "USB Wake-up function" does not work When "System ON CDP Charge Mode" or "Power Off and Charge function" is enabled, the "USB Wake-up" function does not work for ports that support the Power Off and Charge function. In that case, use a USB port that does not have the Power Off and Charge function or change to disable both "System ON CDP Charge Mode" and "Power Off and Charge function".
Problem Procedure Monitor does not turn on After confirming that the monitor's power switch is on, check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor. Press the function key in order to change the display priority and ensure that it is not set for the internal display only. Check to see if the external monitor is connected.
Wireless LAN Problem Procedure Cannot access Wireless LAN Make sure that the wireless communication function of the computer is on. If problems persist, contact your LAN administrator. Bluetooth® Problem Procedure Cannot access Bluetooth® device Check to ensure that the wireless communication function of the computer is on. Check to ensure that power to the external Bluetooth® device is turned on. Check to ensure that no optional Bluetooth® Adaptor is installed in the computer.
Technical support If you are still unable to solve the problem and suspect that it is hardware related, refer to the information listed in the accompanying warranty booklet.
Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The physical dimensions vary depending on the model you purchased. Size Approximately 303.9 (w) x 197.4 (d) x 17.
AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Certification agencies China: CQC U.S. and Canada: UL listed and CSA certified No.
USA United Kingdom, South Africa, Middle-East UL approved BS approved Australia Europe, Africa, South Africa, Middle-East AS approved Approved by the appropriate agency Canada China CSA approved CCC approved State of Israel Africa SII approved Approved by the appropriate agency Switzerland Italy Approved by the appropriate agency Approved by the appropriate agency Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems with
Bluetooth® Modules are designed to be interoperable with any product with Bluetooth® wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth® Specification (depending on the model you purchased), as defined and approved by the Bluetooth® Special Interest Group. Logo certification with Bluetooth® wireless technology as defined by the Bluetooth® Special Interest Group.
Wireless LAN Technology The wireless communication function of the computer supports some wireless communication devices. Only some models are equipped with both Wireless LAN and Bluetooth® functions. Do not use the Wireless LAN (Wi-Fi®) or Bluetooth® functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi® or Bluetooth® operation.
Country/region where the product was purchased Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN networking products have been designed for operation in the license-free 2.4 GHz, 5 GHz and 6 GHz band, local radio regulations might impose a number of limitations to the use of wireless communication equipment. Radio Frequency Band 2.4 GHz (2400-2483.
Encryption prevents eavesdropping and maintains link privacy. Worldwide operation The Bluetooth® radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other.
Russian Federation: Limited Using SRD (Short Range Device) with implementation FHSS (Frequency-Hopping Spread Spectrum) modulation. 1. 2. 3. Maximum 2.5 mW (4 dBm) EIRP (Equivalent Isotropically Radiated Power) is permitted to use.
Using SRD with DSSS (Direct Sequence Spread Spectrum) and other than FHSS wideband modulation. 1. 2. 3. Maximum EIRP density is 2 mW/ MHz. Maximum100 mW (20 dBm) EIRP is permitted to use. Maximum EIRP density is 20 mW/MHz. Maximum 100 mW (20 dBm) EIRP is permitted to use with the following condition: It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems.
Restrictions for Use of 5150 - 5350 MHz Frequencies in Europe Austria, Limited Belgium, implementation Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain and Northern Ireland, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden This product is for indoor use only.
Software Version Intel® PROSet/Wireless WiFi Software 22.x and following versions Maximum Power Output (2400 - 2483.5 MHz) IEEE 802.11 b/g/n/ax mode / Bluetooth Maximum 100 mW (20 dBm) EIRP (2400 - 2483.5 MHz) BLE Maximum 10 mW (10 dBm) EIRP (5150 - 5725 MHz) IEEE 802.11 a/ n/ac/ax mode Maximum 200 mW (23 dBm) EIRP (5745 - 5875 MHz) IEEE 802.11 a/ n/ac/ax mode Maximum 25 mW (13.98 dBm) EIRP (5945 - 6425 MHz) IEEE 802.11 ax mode Maximum 200 mW (23 dBm) EIRP The low band 5.15 - 5.
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. The term “IC” before the equipment certification number only signifies that the ISED technical specifications were met. USA - Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Important notice The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory production lines (Other Radio Stations). 1. 2. 3. Before using this equipment, ensure that it does not interfere with any of the equipment listed above.
4. About the JEITA 5 GHz Wireless LAN supports W52/W53/W56 Channel. /ax /ax Device Authorization This device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law of Japan. Intel® Wi-Fi® 6E AX211 The Name of the radio equipment: AX211D2W DSP Research, Inc.
2. 3. On the dynabook Setup Utility screen, select MEBx -> Intel(R) ME Password, and enter the default password “admin” in the password field. Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.) and upper-case (“A”, “B”, “Z”, etc.) letters.
When connecting the AC adaptor, the computer is powered and can be turned on. If the power is automatically turned off after approximately 5 to 7 seconds, it is because the RTC lasting time runs out and the settings of AMT function have been cleared. This is normal and not an error. If it occurs, the settings of AMT function must be reconfigured.
Accessibility Accessibility options provided by Windows 11 operating system are accessible through Accessibility features of Windows settings. It allows you to customize your Dynabook notebook the way you want to use it. To see the available features in one of the following ways: Go to Start and select Settings ( ). Using a keyboard, press the ( Windows key ) + I, scroll up to the word Settings, then press Enter. Then select Accessibility from the Settings screen.
Hearing Audio: For those with hearing difficulties, this option makes it easier to hear with features like Hear all sounds in one channel, and Display audio alerts visually. Captions: Lets you read the word spoken in the audio portion of a video, TV show or Movie that supports Closed Caption technology. You can select the settings you want and see how they appear in Preview. Click here for more information about making your device easier to hear or use with these visual alternatives to sound.
Touch Screen: Some notebook configurations have touch screen capability, refer to Using the Touch Screen section for more information. Touch Pad: The Touch Pad on the palm rest supports several features, refer to Using the Touch Pad section for more information. Keyboard: The number of keys available on your keyboard depends on which region your computer is configured for, with keyboards being available for numerous languages.
Utilities and Advanced Usage: Your computer comes with preinstalled utilities such as dynabook Settings, eco Utility USB Charging, Power Off and Charge, System ON CDP Charge, System Password, User Password, Supervisor Password, Pre-Boot Authentication, dynabook Service Station, dynabook Setup Utility, and dynabook Maintenance Utility. Refer to Utilities and Advanced Usage section for more information. You might have all the software listed depending on the model you purchased.
use of computer at temperatures outside the range of 5°C to 30°C (41 -86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and might vary depending on the specific computer model - contact Technical Support for details). CPU performance might also vary from specifications due to design configuration. Under some conditions, your computer product might automatically shut down.
powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity might vary. LCD Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate.
User's Manual AMT: Intel® Active Management Technology ASCII: American Standard Code for Information Interchange BIOS: Basic Input/output System BD-ROM: Blu-ray Disc™ Read-only Memory bps: bits per second CD: Compact Disc CD-ROM: Compact Disc Read-only Memory CD-RW: Compact Disc-rewritable CMOS: Complementary Metal-oxide Semiconductor CPU: Central Processing Unit DC: Direct Current DDR: Double Data Rate DIMM: Dual Inline Memory Module DVD: Digital Versatile Disc DVD-R: Digital
User's Manual IRQ: interrupt request ISP: Internet Service Provider KB: kilobyte LAN: Local Area Network LCD: Liquid Crystal Display LED: Light Emitting Diode MB: megabyte MBps: megabytes per second MMC: MultiMediaCard OCR: Optical Character Recognition (Reader) PC: Personal Computer PCI: Peripheral Component Interconnect PCMCIA: Personal Computer Memory Card International Association RAM: Random Access Memory RGB: Red, Green, and Blue RFI: Radio Frequency Interference ROM:
Index A External monitor problems 6-14 AC adaptor additional 4-29 connecting 2-5 G Graphics Processing Unit 3-11 B Battery extending life 4-17 monitoring capacity 4-16 real time clock 4-13 save mode 5-10 Bluetooth® 7-6 H Hard disk drive automatic power off 5-10 K Keyboard function keys 4-9 function keys F1...
Memory media slot 4-17 microSD/SDHC/SDXC card note 4-18 Moving the computer 1-19 P R Recovery hard disk drive 2-16 Recovery Media 2-15 S SD/SDHC/SDXC card formatting 4-18 Password power on 5-10 Starting the computer by password 5-6 Supervisor 5-6 User 5-5 Security lock 4-28 SIM card installing 4-21 removing 4-22 Power Hibernation Mode 2-12 panel on/off 5-11 Shut Down mode 2-10 Sleep Mode 2-11 turning off 2-10 turning on 2-7 Problems AC power 6-5 Analyzing the problem 6-2 Battery 6-5 Dual Pointing devi
W Web Camera 3-6, 3-7 Wireless communication 7-5 User's Manual Index-3
Instruction Manual for Safety and Comfort
Table of Contents Introduction .......................................................................................4 Safe Use of Product, Components and Accessories ........................................................5 Power ....................................................................................................5 Communication....................................................................................12 Main Unit ....................................................................
© 2020 Dynabook Inc. All Rights Reserved. Any references in this Guide to “TOSHIBA” shall mean Dynabook Inc. and/ or its affiliates. The product system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically.
Introduction All of the Safety Instructions contained in this Manual must be read carefully and must be fully understood before you attempt to use your product, in order to avoid potential hazards that could cause bodily injury, property damage, or damage the product. Not all components or functions introduced in this Manual will be provided with your product. Some features are only available on certain models. Store this Manual near your product, for convenient future reference.
Power Safe Use of Product, Components and Accessories Power WARNING Handling of the battery ■ Never attempt to dispose of a battery by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a battery to explode and/or release caustic liquid, both which may possibly cause serious injury. ■ Never attempt to disassemble, tamper with or repair a battery. The battery could overheat and ignite.
Power WARNING ■ Never allow a battery to become wet. A wet battery will overheat or ignite causing rupture or fire, possibly resulting in death or serious injury. ■ Never store a battery in an area of high humidity. This could cause a fire or explosion possibly resulting in serious injury. ■ Never expose a battery to abnormal shock, vibration or pressure. Never use a battery which has been exposed to abnormal shock even if the appearance is normal.
Power WARNING Battery warning indicators ■ Always immediately turn the power off and disconnect the power cable/ cord plug from the plug socket and stop using the battery if you observe any of the following conditions: ■ Offensive or unusual odor ■ Excessive heat ■ Discoloration ■ Deformation, cracks or leaks ■ Smoke ■ Other unusual event during use, such as abnormal sound In such an event, carefully and immediately remove the battery (for models with the removable battery) from your product.
Power WARNING Do not disassemble, modify, tamper with or repair your product ■ Do not attempt to disassemble, modify, tamper with or repair product (including AC adaptor). Disassembly, modification, tampering or repairing your product could cause fire or electric shock, possibly resulting in serious injury. Please contact an authorized Toshiba service provider for any repair service.
Power WARNING Attaching the power cable/cord ■ Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury. ■ Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury.
Power WARNING Only use approved power cables/cords ■ Always use or purchase power cables/cords that comply with the legal voltage and frequency specifications and requirements in the country of use. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury. Do not handle the power plug with wet hands ■ Never attempt to connect or disconnect a power plug with wet hands.
Power NOTE Handling of the battery ■ Never attempt to install batteries in reverse polarity. For more information on batteries, please refer to your product User's Manual. Storing your product ■ If you do not intend to use your product for a long period of time, disconnect the power plug from the plug socket and store your product in a plastic bag to avoid dust accumulation.
Communication Communication WARNING Turn Wi-Fi®, Bluetooth™ and Wireless WAN Functionalities off for Cardiac Pacemakers ■ Turn Wi-Fi, Bluetooth and Wireless WAN Functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wi-Fi or Bluetooth or Wireless WAN functionality.
Communication Turn Wi-Fi or Bluetooth or Wireless WAN Functionalities off in aircraft ■ Turn off the Wi-Fi or Bluetooth or Wireless WAN functionality in aircraft or in places that generate or can generate radio interference. Radio waves can potentially affect them, causing an accident due to malfunction.
Communication Ensuring Wireless Network Security ■ A wireless LAN can greatly enhance the flexibility of your LAN configuration and operations. You can exchange data between products and other devices on the LAN without the restrictions inherent in cabling. Toshiba strongly recommends that you take appropriate steps to ensure that the proper security is in place whenever you use a wireless connection to protect your privacy and guard against identity and/or data theft.
Main Unit Main Unit WARNING Turning off your product where electronic devices are regulated or controlled ■ When you have to turn off your product aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down your product. This includes turning off any wireless communication switches or devices, and canceling settings that reactivate your product automatically, such as a timer recording function.
Main Unit WARNING Choking hazards ■ Never leave small parts such as covers, small batteries, small memory cards, caps and screws within the reach of infants or small children. Swallowing a small part may cause choking and suffocation resulting in death or serious injury. If a part is swallowed, immediately take appropriate emergency action and consult a doctor.
Main Unit WARNING Do not use liquid cleaners or aerosol cleaners ■ Always turn off the power and unplug the product from the electrical outlet before cleaning. The injected combustible gas produced by these types of cleaners may remain inside of your product. The electrostatic spark from the motor or contact point of switch may ignite the gas residue, which could result in an explosion, fire, or burn injury. Instead use a lightly dampened cloth for cleaning in general and remove dust with a dry cloth.
Main Unit CAUTION Avoid placing your product on unstable surfaces ■ Never place your product on a shaky table, uneven, tilted surface or other unstable location. your product may fall, causing damage to your product or possibly injury. Depending on the direction and/or angle of tilt of your product, your product could automatically shut down to avoid overheating.
Main Unit CAUTION Never place your product in a dusty location ■ Do not expose your product to dusty environments. If dust gets inside your product, it could cause a system failure, malfunction or loss of data. If dust contaminates your product, do not turn on the power. Take it to an authorized Toshiba service provider before you use it. Clean any dust accumulated on your product’s air vents ■ Always remove the dust accumulated on your product's air vents.
Main Unit CAUTION Never place or drop heavy objects onto your product ■ Never place a heavy object on your product and be careful not to drop a heavy object onto your product. It could damage your product or cause system failure. Never place or drop objects onto your product’s display screen ■ Never place or drop objects onto your product’s display screen. Failure to follow this instruction could result in possible damage to your product.
Main Unit NOTE Product installation environment ■ Always provide sufficient space around your product to ensure adequate ventilation. ■ Never cover or block the air vents. ■ Use your product at temperatures and humidity levels within the recommended environmental ranges. These ranges may vary depending on the specific product model - please refer to your product documentation or Toshiba website for details. ■ Always avoid abrupt changes of temperature or humidity.
Systems/Peripherals Systems/Peripherals DANGER Do not disassemble or repair your optical drive ■ The product may contain a Optical Disk Drive (ODD), such as a CDROM, CDR/W, DVD, Blu-ray Disc™ drive or similar which have built-in laser device. To prevent any risk of exposure to laser radiation, do not disable or open any ODD assembly for any reason. ■ The ODD comply with the safety requirements and is classified as Class 1 Laser Product, under the US DHHS Standard and IEC/ EN60825-1 Laser Safety Standard.
Systems/Peripherals CAUTION Connecting peripheral devices ■ Always turn the power off before connecting a peripheral device that is not approved for Hot Insertion. An electrical shock or system failure may result if the peripheral device is connected while the power is turned on. ■ Hot Insertion means connecting or disconnecting a device while your product power is on.
Systems/Peripherals CAUTION Replacing the memory module ■ Turn off the power and disconnect the AC adaptor when installing or replacing a memory module. ■ If you use your product for an extended period of time, the memory modules and the circuits located close to the memory modules will become hot. Allow them to cool to room temperature before you replace them. CAUTION Never remove the key caps ■ Never remove the key caps on your keyboard. Doing so could cause damage to the parts under the key caps.
Systems/Peripherals CAUTION Periodic back up of stored data ■ It is a good idea to periodically back up the internal hard disk or other main storage device to external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss. Save data before installing devices or software ■ Before you install a device or application, save any data in memory to the hard disk drive or other storage media.
Systems/Peripherals NOTE Anti-virus software ■ Use a virus-check program and make sure it is updated regularly. Use AC power when playing video of DVD/Blu-ray™ ■ When playing video of DVD/Blu-ray™, always connect the AC adaptor to a power plug socket or power source to ensure maximum performance. Operation on battery power might result in skipped frames.
Good Working Posture Computer User Comfort Recommendations Good Working Posture ■ Adjust your chair height: your feet should be flat on the floor and the bottom of your thighs should be evenly supported by the seat. If your feet cannot reach the floor, use a foot rest. Avoid pressure points behind the knee or under the thigh.
Viewing Recommendations ■ Rest your eyes periodically by focusing on objects that are farther away. Viewing Recommendations ■ Some individuals may experience health-related complications when exposed to certain images or flashing lights (for example when playing videos or games). Discontinue use and consult a physician if you experience any health-related complications.
Typing style / Taking breaks and varying Typingtasks style ■ The top of the monitor should be at or slightly below eye level. A monitor that is too high or too low can cause awkward head and neck postures and may lead to discomfort in the neck muscles. ■ If you use bifocals you may need to lower the monitor. Alternatively, you might consider customized prescription product glasses. Typing style ■ Learn to touch type so that you don’t have to look down at the keyboard. ■ Type with straight wrists.
Mobile computing tips / Transporting the product / Seeking additional help Mobile computing tips ■ When using the product at airports, on airplanes or trains, or at meetings, make sure that you take the time to consider the points just mentioned. ■ When working on the road it may be difficult to set up the product in an optimal position. In these situations it is important that you take frequent breaks and change your posture frequently to relieve the excess loads on your body.
Check list Check list ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Is your chair comfortable - does it support your back and arms well? Are your feet flat on the ground? Is there adequate space under your desk for your legs? Are the keyboard and mouse at elbow level? Are your shoulders relaxed when using the keyboard? Are your shoulders relaxed when using a mouse or other optional pointing device? Are your hands and wrists aligned in a comfortable, straight posture? Are your arms supported in the forearm area (not a
