Operating instructions

6
IMPORTANT SAFEGUARDS
When using electrical appliances, the following basic safety precautions
should always be adhered to:
1. Read all instructions.
2. Avoid electrical shock: do not put cord plug, base, or motor in water or other liquid;
never put a wet plug into an outlet, or handle with wet hands; and never immerse the
Motor Base into water, instead wipe with a damp cloth only and dry promptly.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from the outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Blades are sharp, handle carefully. Avoid contact with moving parts.
6. Always use on a level, sturdy surface.
7. Do not use outdoors.
8. Do not operate while driving a vehicle.
9. Do not operate any appliance with a damaged cord or plug. If the Dynablend
®
malfunctions, is dropped, or damaged in any manner, call the main service center
(888-254-7336) to get a Return Merchandise Authorization (RMA) No. to send your
Dynablend
®
to the service center. Returns will not be accepted without a RMA No.
clearly written on the box.
10. Only use attachments sold by Tribest
®
with the Motor Base. The use of attachments,
including canning jars, is not recommended by the manufacturer and may cause injury
to persons or damage to the Dynablend
®
.
11. Do not let cord hang over edge of a table or counter, or touch the stove or other
hot surfaces.
12. To avoid injury, properly attach the Blade Assembly to the Glass Pitcher base.
13. Do not blend liquids over 104°F. When blending hot liquids, remove center piece of the
two-piece lid.
14. Only use the Dynablend
®
for its intended purpose. For Household use only. Not for
commercial use.
15. Wash the Glass Pitcher and Blade Assembly immediately after each use.
16. In 30 second Pulse mode, always allow the machine to rest for at least one minute
between consecutive blending cycles of 30 seconds. When blending in the 60 second
cycles, 60 second Blend or Combo mode, do not exceed 3 consecutive cycles.
17. Store the Glass Jar with its Lid. Make sure the parts are thoroughly dry.
18. The Dynablend
®
has a polarized plug. To reduce the risk of electric shock, this plug
will fit in a polarized outlet in only one way. If the plug does not fit properly in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.