Operating instructions

13
How to Remove Blade Assembly from the Glass Pitcher
1. Turn the Glass Pitcher upside down.
2. Align ridges on the Blade Opener
to the grooves on the Blade
Assembly (as shown in Green).
3. Unlock the Blade Assembly by turning
the Blade Opener counter-clockwise.
4. Make sure to see whether the Blade
Assembly has been released from
the locked position to unlocked
position (as shown in Orange).
5. Cover the bottom of the Glass
Pitcher with your palm and turn
the Glass Pitcher right side up.
The Blade Assembly will slowly fall
into your palm.
WARNING: The blade is sharp. Do not
touch to avoid cutting yourself. Do not
leave it in soapy water where it may
not be visible.
NOTE: Additionally, you may use the
inside of the Lid as a blade opener.
Align the inside of the Lid Cap opening
with the Blade Assembly and turn
counter-clockwise.
How to Reassemble the Blade Assembly
1. Place the Silicone Seal at the ridge of the
Glass Pitcher.
2. Place the Blade Assembly in its place over the
Silicone Seal and turn it clockwise to its locked
position using the Blade Opener.
STORAGE
1. Keep your Tribest
®
Dynablend
®
ready for use on the kitchen counter.
2. Keep it unplugged when it is not in use.
3. If you keep your Blade Assembly disassembled, please store it in a convenient, safe
place out of the reach of children, as you would with sharp knives.
Locked
Unlocked