Installation Instructions

3
ITEM PAGE #
SPECIFICATIONS ........................................................................... 3
SAFETY INFORMATION ................................................................. 3
LOCATING HEATER ....................................................................... 4
PRE-INSTALLATION ....................................................................... 5
INSTALLATION ............................................................................... 6
OPERATING INSTRUCTIONS ........................................................ 10
MAINTENANCE .............................................................................. 12
REPLACEMENT PARTS ................................................................. 12
TROUBLESHOOTING .................................................................... 13
1. Use only copper wires rated for at least 60ºC.
2. Heaterairowmustbedirectedparalleltoorawayfromadjacentwall.
3. Observeallwall,oorandceilingclearancerequirements.
4. Allwiringmustbedoneaccordingtonationalandlocalelectricalcodes.The
  heatermustbegroundedasaprecautionagainstpossibleelectricalshock.
  Heatercircuitmustbeprotectedwithproperfuses.
5. Themountingstructureandtheanchoringhardwaremustbecapableof
  supportingtheweightoftheheaterandthemountingbracket(ifused).
Rating AMPS BTU/hour
5000W III 240-1-60 20.9 17065
4000W II 240-1-60 16.7 14105
3000W I 240-1-60 12.5 11285
TABLE OF CONTENTS
SPECIFICATIONS
SAFETY INFORMATION
THISHEATERREQUIRESHARDWIREINSTALLATION(NOPLUG).THEINSTALLATIONOFTHIS
PRODUCT MUST BE CARRIED OUT BY A CERTIFIED ELECTRICIAN AND IN ACCORDANCE WITH
ALL LOCAL AND NATIONAL ELECTRICAL CODES.
NOTE: COMPATIBLE WITH A 240V LINE VOLTAGE DOUBLE POLE WALL THERMOSTAT. MUST BE
INSTALLED BY A CERTIFIED ELECTRICIAN.
READ AND UNDERSTAND ALL INSTALLATION & OPERATION INSTRUCTIONS PRIOR TO
OPERATING THIS UNIT. OBSERVE ALL SAFETY INSTRUCTIONS.
WARNING