40" 2-Door Vertical Electric Digital Smoker MODEL #DGU951SDE / DGU951SDE-D Français p. 28 Español p. 55 FOR OUTDOOR USE ONLY Use only with Class A GFI (Ground Fault Interrupter) ATTACH YOUR RECEIPT HERE Serial Number ________________________________ Purchase Date _________________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m.
DYNA-GLO® 40" 2-DOOR VERTICAL ELECTRIC DIGITAL SMOKER STOP! NO NEED TO RETURN TO THE STORE Questions with The Assembly? Require Parts Information? Product Under Manufacturers Warranty? Call Toll Free : 1-877-447-4768 8:00 a.m. – 4:30 pm CST, Monday – Friday Retain This Owner's Manual And Proof Of Purchase For Future Reference To help us help you Fill in the information below: Date of Purchase Place of Purchase Model Number Product Serial No.
TABLE OF CONTENTS Safety Information ...................................................................................................................... 3 Package Contents ...................................................................................................................... 8 Hardware Contents ..................................................................................................................... 9 Preparation Before Assembly ..............................................
SAFETY INFORMATION IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS, PRIOR TO USING THIS SMOKER • DO NOT use this product for anything other than its intended purpose. It is NOT intended for commercial use. It is NOT intended to be installed or used in or on a recreational vehicle and/or boat. • DO NOT operate this smoker with a damaged cord or plug or after the smoker malfunctions, has been dropped, or is damaged in any manner.
SAFETY INFORMATION • DO NOT wear loose clothing while operating the smoker. Tie back long hair while operating the smoker. • ALWAYS wear shoes that fully cover your feet while operating the smoker. • DO NOT touch hot surfaces. Use handles or knobs. • To protect against electrical shock do not immerse cord or plugs in water or other liquid.
SAFETY INFORMATION Ground Fault Interrupter • Since 1971, the National Electric Code (NEC) has required Ground Fault Interrupter devices on all outdoor circuits. • If your residence was built before 1971, check with a qualified electrician to determine if a Ground Fault Interrupter protector exists. • Do not use this appliance if the circuit does not have Class A GFI protection. • Do not plug this appliance into an indoor circuit.
SAFETY INFORMATION WARNING To avoid serious injury: • While cooking, the smoker must be on a level, stable, noncombustible surface in an area clear of combustible material, including long or dry grass. • The use of alcohol, prescription or nonprescription drugs may impair the user’s ability to properly assemble and safely operate this appliance. • DO NOT move the appliance while it is in use.
PACKAGE CONTENTS D F G E A A H K I J C E PART A B C D E F G H I J K DESCRIPTION QUANTITY Smoker cabinet assembly 1 Rear casters 2 Front legs (left/right) 2 Rear handle 1 Door handle (upper door/ lower door) 2 Rib & Sausage rack 1 Cooking grates 4 Water bowl 1 Wood chip box 1 Drawer assembly 1 Grease tray 1 8 B
HARDWARE CONTENTS (PRE-ASSEMBLED) AA BB CC M4 x 35 mm Screw M6 x 12 mm Screw M5 x 12 mm Screw Qty. 8 Qty. 6 Qty. 12 8 M4 x 35 mm screws (AA) are pre-assembled in each of the 2 door handles (upper door/lower door) (E). 6 M6 x 12 mm screws (BB) are pre-assembled in the smoker cabinet assembly (A). 12 M5 x 12 mm screws (CC) are pre-assembled in the smoker cabinet assembly (A). PREPARATION BEFORE ASSEMBLY Before beginning assembly of product, make sure all parts are present.
ASSEMBLY INSTRUCTIONS 1. Remove the pre-installed screws on the bottom of the cabinet assembly (A). Attach each of the rear casters (B) to the bottom of the cabinet assembly (A) using 4 M5 x 12 (CC) screws per caster. Attach the bottom of the front legs (C) to the bottom of the cabinet assembly (A) using 3 M6 x 12 (BB) screws per leg. v 1 BB A Hardware Used BB M6 x 12 mm Screw x6 CC M5 x 12 mm Screw x8 CC B C BB 2.
ASSEMBLY INSTRUCTIONS 3. Remove the pre-installed screws on the door handle (E) and attach the handle to the upper door on the cabinet assembly (A) using the preinstalled screws. 3 A E Hardware Used AA 4. M4 x 35 mm Screw x4 AA Remove the lower drawer assembly (J) from the cabinet assembly (A). Remove the pre-installed screws on the drawer handle (E) and attach the handle to the drawer assembly (J) using the preinstalled screws.
ASSEMBLY INSTRUCTIONS 5. Place the grease tray (K) onto the lower frame of the drawer assembly (J). Place the water bowl (H) and wood chip box (I) onto the upper wire supports of the drawer assembly (J). 5 I H J K 6. Slide the drawer assembly (J) onto the cabinet support rails as shown.
ASSEMBLY INSTRUCTIONS 7. Slide the 4 cooking grates (G) onto the support rails of the cabinet (A) as shown Installing the Rib Rack (Optional). Place the rib and sausage rack (F) directly onto the desired grate (G) before sliding the grate onto the supports.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-447-4768, 8:00 a.m. - 4:30 p.m. CST, Monday - Friday or e-mail us at customerservice@ghpgroupinc.com. PART DESCRIPTION 1. Smoker Cabinet Assembly 2. Rear Handle PART # 70-01-610 PART DESCRIPTION 17. Rear Casters (L/R) PART # 70-01-624 70-01-611 18. 70-01-625 3. Top Door Hinge 70-01-612 19. 4. 20. 6.
REPLACEMENT PARTS LIST 10 11 4 2 8 1 3 9 28 12 16 5 7 14 26 13 17 A 15 29 19 20 27 24 18 23 6 25 22 21 30 70-10-636 Printed in China 26
