Heavy-Duty Charcoal Offset Vertical Smoker & Grill MODEL #DGSS1382VCS / DGSS1382VCS-D Français p. 26 Español p. 51 ATTACH YOUR RECEIPT HERE Serial Number ________________________________ Purchase Date _________________________________ 70-10-583 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday or email customerservice@ghpgroupinc.com. 1 Rev.
TABLE OF CONTENTS Safety Information ...................................................................................................................... 2 Package Contents ...................................................................................................................... 4 Hardware Contents .................................................................................................................... 5 Preparation ...................................................................
SAFETY INFORMATION • DO NOT use this product in a manner other than its intended purpose. It is NOT intended for commercial use. It is NOT intended to be installed or used in or on a recreational vehicle and/or boats. • DO NOT store this unit near gasoline or other combustible liquids or where other combustible vapors may be present. • DO NOT use or store or operate this unit in an area accessible to children or pets. Store this unit in a dry protected location.
PACKAGE CONTENTS A1 A A B1 B C C1 Z Y D X E W V F P U H G I A T J S R PART A B C D E F G H I J K L M N N Q K O M DESCRIPTION QUANTITY Smoker body 1 Temperature gauge with nut 1 Sausage hooks 1 Side access door 1 Cooking grate - smoker body 5 Side handle - smoker body 1 Water bowl support 1 Wheel - left / right 2 Left leg assembly 1 Water bowl 1 Grease cup support 1 Grease cup 1 Right leg - front / rear 2 Wheel axle 1 PART O I P Q R S T U V W X Y Z A1 B1 C1 4 L DESCRIPTION Offset da
HARDWARE CONTENTS AA BB CC DD EE FF M6 x 30 Bolt M6 x 12 Bolt M6 x 45 Bolt M6 Nut M12 Nut M6 Lock Nut Qty. 4 Qty. 33 Qty. 3 Qty. 9 Qty. 2 Qty. 1 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
ASSEMBLY INSTRUCTIONS CAUTION: This unit is HEAVY! Do not attempt to stand the unit upright without assistance! 1. 1 Remove the preinstalled bolt and washer from the bottom door hinge on the smoker body (A). Unlatch the smoker door and remove the door by pulling up from hinges on smoker body (A). A Preinstalled bolt and washer 2. Attach the side handle (F) using four M6 x 30 bolts (AA) and four M6 nuts (DD).
ASSEMBLY INSTRUCTIONS 3. CAUTION: This unit is HEAVY! Do not attempt to lay the unit on its side without assistance! Attach the right front and right rear legs (M) using three M6 x 12 bolts (BB) per leg. Attach the left leg assembly (I) using three M6 x 45 bolts (CC). 3 CC I Hardware Used BB CC 4. M6 x 12mm Bolt M6 x 45mm Bolt x3 Insert the wheel axle (N) through the holes on the left leg assembly (I) and attach the left and right wheel (H) using one M12 nut (EE) per side.
ASSEMBLY INSTRUCTIONS 5. Insert the edge of the offset lid bracket (Y) into the slotted opening on the offset top section (W). Attach using one M6 x 12 bolt (BB) and one M6 nut (DD). 5 Y W BB DD Hardware Used BB M6 x 12mm Bolt x1 DD M6 Nut x1 6. Attach the offset bottom section (U) to the top section (W) using six M6 x 12 bolts (BB).
ASSEMBLY INSTRUCTIONS 7. Insert the offset firebox coupling (C1) through the opening on the top section of the offset (W) and attach with four M6 x 12 bolts (BB). 7 W Hardware Used BB 8. M6 x 12mm Bolt C1 BB x4 Attach the offset coupling brackets (P) using four M6 x 12 bolts (BB).
ASSEMBLY INSTRUCTIONS 9. CAUTION: This unit is HEAVY! Do not attempt to stand the unit upright without assistance! Attach the offset firebox to the smoker body (A) using four M6 x 12 bolts (BB). 9 A BB Hardware Used BB 10. M6 x 12mm Bolt x4 Attach the preinstalled offset support bracket on the left leg assembly (I) to the bottom section of the offset (U) using two M6 x 12 bolts (BB) and two M6 nuts (DD).
ASSEMBLY INSTRUCTIONS 11. Rest the inner ring of the sausage hooks (C) on the bottom brackets of the smoke stack (Z). Insert the smoke stack (Z) up through the opening at the top of the smoker body (A) and secure with three M6 x 12 bolts (BB). 11 BB A Z Hardware Used BB 12. M6 x 12mm Bolt C x3 Attach the smoke stack damper (A1) using the preinstalled spring and nut.
ASSEMBLY INSTRUCTIONS 13. Hang the grease cup support (K) from the holes on each of the right legs (M). Place the grease cup (L) in the support (K). 13 M L K 14. Install the smoker body door and reattach the preinstalled bolt and washer.
ASSEMBLY INSTRUCTIONS 15. Attach the door handle assembly (B1) using the pre-installed flat washer, spring washer and M8 nut. 15 B1 16. Attach the temperature gauge (B) by inserting the probe through the threaded opening on the smoker body door and turning clockwise. NOTE: The alignment of the temperature gauge can be adjusted by turning the preinstalled nut clockwise (or counter-clockwise) prior to installing.
ASSEMBLY INSTRUCTIONS 17. Attach the offset lid handle (V) to the offset lid (X) using the preinstalled bolts and nuts. 17 X V 18. Attach the offset lid (X) to the offset firebox using the preinstalled bolt and washer.
ASSEMBLY INSTRUCTIONS 19. Install the side access door (D) onto the smoker body (A). 19 D A 20. Attach the side handle (S) to the access tray (T) using two M6 x 12 bolts (BB) and two M6 nuts (DD).
ASSEMBLY INSTRUCTIONS 21. Attach the offset damper plate (O) to the access tray (T) using one M6 x 12 bolt (BB) and one M6 lock nut (FF). 21 FF O Hardware Used BB M6 x 12mm Bolt x1 FF M6 Lock Nut x1 22. T BB Place the charcoal grate (Q) inside the access tray (T) and slide the tray into the offset smoker box.
ASSEMBLY INSTRUCTIONS 23. Installing the Cooking Grates & Water Bowl 23 A Install the offset cooking grates (R) into the offset firebox. Place the water bowl support (G) on the bottom bracket inside the smoker body (A) and place the water bowl (J) on the water bowl support (G). Place the cooking grates (E) on the brackets inside the smoker body (A). Tip: Place all 5 cooking grates (E) inside the smoker body (A) and start from bottom grate supports.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday or email customerservice@ghpgroupinc.com.
REPLACEMENT PARTS LIST 3 1 2 32 34 31 30 33 29 4 7 A 5 28 A 27 6 26 8 25 A 15 9 10 11 12 13 14 16 24 23 22 17 18 19 20 21 70-10-583 Printed in China 25
