Instructions / Assembly

11
ASSEMBLY INSTRUCTIONS
I
M
11. Ins
tall the knob (KK) and chain and
long stem lighter assembly (MM) using M4x10
screw (LL) as illustrated in figure 11. Take the
hook at the other end of the chain and long
stem lighter assembly (MM) and attach it to the
hole in the control box assembly (I) as
illustrated in figure 11A. Slide the hooks
attached to the bottom of the front panel (H)
into the holes on the bottom plate (M) as
illustrated in figure 11B.
Hardware Used
x 1
KK
Knob
11A
11B
LL
JJ
x 1
x 1
Philips
screwdriver
Screw M4 X 10
x 1
MM
Chain and
Long Stem
Lighter Assembly
11
KK
LL
H
MM
12. To secure the unit, please use four nails
M8x100 (not included) to nail the unit to
the ground.
12