Installation Guide

7
ASSEMBLY INSTRUCTIONS
1. Assemble the wheel assembly (L) to the
bottom plate (M). Fix the wheel assembly (L)
to the bottom plate using four M6 x 12 bolts
(EE) and four ange nuts M6 (FF).
2. Unscrew ignitor knob (marked with lighting
bolt) on the control box assembly (I). Insert
AA battery (NN) with positive end (+) outward
and replace ignitor knob.
Bolt M6 x 12
Hardware Used
Hardware Used
M6 Flange nut
Wrench
Phillips
Screwdriver
AA battery
x 4
x 4
x 1
EE
FF
NN
M
L
I
EE
FF
II
JJ
NN
1
2
The electronic ignition requires 1 “AA” alkaline battery, which is included.
WARNING
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargable (Nickel-Cadmium) batteries.
DO NOT dispose of batteries in re. Improper disposal may cause batteries to leak or explode.