Installation Guide

12
11. Install the knob (KK) and chain and long
stem lighter assembly (MM) using one M4 x
10 screw (LL) as illustrated in gure 11.
Take the hook at the other end of the chain
and long stem lighter assembly (MM)
and attach it to the hole in the control box
assembly (I) as illustrated in gure 11A.
Slide the hooks attached to the bottom of
the front panel (H) into the holes on the
bottom plate (M) as illustrated in gure 11B.
12. To secure the unit, please use four nails
M8 x 100 (not included) to nail the unit to
the ground.
Screw M4 x 10
Chain and
Long Stem
Lighter Assembly
Knob
ASSEMBLY INSTRUCTIONS
Hardware Used
x 1
x 1
x 1
Phillips
screwdriver
11
12
KK
JJ
LL
MM
11A
11B
LL
H
I
M
KK
MM