Instructions / Assembly

11
9. Assemble the protective guard (E).
Hang the hooks of the protective guard
(E) onto the holes in upper supports (D).
Secure the protective guards (E) with xing
brackets (HH) with four 3/16” screws (DD).
10. Attach the three side panels (G) to the
heater using eighteen 3/16” screws (DD).
Note: Do not cover the front side where the
control knob is located.
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
3/16” Screw
3/16” Screw
x 4
x 4
x 18
Phillips
screwdriver
Phillips
screwdriver
Fixing
Bracket
9
10
DD
DD
JJ
JJ
HH
DD
DD
HH
D
E
G