Installation Guide

9
ASSEMBLY INSTRUCTIONS
7. Attach reector spacers (FF) and three washers 8 (GG)
to screen cover on the head assembly (C). Tighten the
reector spacers (FF).
6
7
Hardware Used
FF
x 3
x 3
x 4
GG
LL
Washer Φ 8
Reector Spacer
Wrench
8. There should be 4 stainless steel bolts M6 x 10 (DD)
already assembled to the head assembly (C). Remove
these stainless steel bolts (DD) and set them aside. Load
the head assembly (C) by inserting the hose into the post
(E). Insert the head assembly (C) into the post (E). Attach
the head assembly (C) to post (E) by loosely installing the
four stainless steel bolts M6 x 10 (DD) previously removed.
Tighten bolts securely.
LL
DD
Wrench
Stainless Steel Bolt M6 x 10
Hardware Used
FF
GG
C
DD
DD
6
8
C
E