Instructions / Assembly

7
ASSEMBLY INSTRUCTIONS
4
4. Insert Cylinder Housing (D) onto Post (E) and seat it on
Base (G).
5.Attach reflector spacers (FF) and three washers Ø8
(GG) to screen cover on the head assembly (C).
Tighten the reflector spacers(FF). Unscrew four stainless
steel bolts (DD).
6. Load head assembly (C) by inserting hose into post (E).
Insert head assembly (C) into post (E). Control knob
should be above decal on post (E). Attach head assembly
(C) to post (E), and loosely install four stainless steel bolts
M6X10(DD). Tighten bolt securely.
FF
GG
x 3
Reflector Spacer
x 3
Washer Φ8
Hardware Used
LL
x 1
Wrench
LL
x 1
Wrench
Hardware Used
DD
x 4
Stainless steel
bolt M6X10
5
6
FF
GG
DD
C
E
DD
C
4
D
E
G
FF
GG
LL
LL
DD