Instructions / Assembly
3
HARDWARE CONTENTS
Screw
M6 x 10
Qty. 9
Washer Φ 6
Qty. 9
Washer Φ 8
Qty. 9
Reector
Spacer
Qty. 3
Bolt
M6 x 30
Qty. 6
M6
Flange
Nut
Qty. 6
Bolt
M8 x 16
Qty. 3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
This manual contains important information about the assembly, operation and maintenance of this patio
heater. General safety information is presented in these rst few pages and is also located throughout the
manual. Keep this manual for future reference and to educate new users of this product. This manual should
be read in conjunction with the labeling on the product. Safety precautions are essential when any mechanical
or propane fueled equipment is involved. These precautions are necessary when using, storing, and servicing.
Using this equipment with the respect and caution demanded will reduce the possibilities of personal injury or
property damage. The following symbols shown below are used extensively throughout this manual. Always
heed these precautions, as they are essential when using any mechanical or fueled equipment.
Wrench
Qty. 1
(not actual size)
M8 Wing
Nut
Qty. 3
M6 Cap
Nut
Qty. 9
BB
AA BB DD
CC EE FF GG HH II JJ KK LL
DANGER
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. If odor continues, keep away from the
appliance and immediately call your gas
supplier or re department.
DANGER
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
DANGER
Failure to comply with the precautions and
instructions provided with this heater can result
in death, serious bodily injury and property
loss or damage from hazards of re, explosion,
burn, asphyxiation, and/or carbon monoxide
poisoning. Only persons who can understand
and follow the instructions should use or service
this heater.
EXTRA HARDWARE (PRE-ASSEMBLED)
M8
Flange
nut
Qty. 2
Bolt
M8 x 16
Qty. 2
Stainless
steel bolt
M6 X 10
Qty. 4