Instructions / Assembly

17
J
M
ASSEMBLY INSTRUCTIONS
19. Open the door assembly (M). Place LP gas
cylinder (sold separately) into the nesting
hole located on the cart bottom shelf (J).
Rotate the LP gas cylinder until the hose/
regulator coupling aligns with the threaded
valve of the cylinder. Hand tighten the hose/
regulator coupling to the threaded valve of
the LP gas cylinder.
Tighten the tank screw clockwise in
the rear of the cart until the LP gas cylinder
is secured in place inside the nesting hole of
the cart bottom shelf (J).
19
Tank
Screw
LP Gas
Cylinder
Front View
Rear View
Fully Assembled
M
J