Use and Care Manual

12
G
5mm
JJ
Y
Y
Y
AA
JJ
M4x12
Bolt
x2
Hardware Used
AA
M6x16
Bolt
x2
J
W
AA
C
G
ASSEMBLY INSTRUCTIONS
11. Carefully place the grill body (C) onto cart
left side panel assembly (L) and cart right
side panel assembly (G). Adjust the grill body
(C) so that the holes in the grill body (C) are
aligned with holes in the tabs of cart left side
panel assembly (L) and cart right side panel
assembly (G).
Note: Make sure the natural gas hose
assembly is inside the cart. Secure the grill
body (C) with four M6X16 bolts (AA).
11
12. Pre-assemble two M6x16 bolts (AA) onto the
cart right side panel assembly (G) and do not
tighten them. Make sure to leave a 5mm gap
between the bolt and the panel. Hang the natu-
ral gas hose bracket onto the bolts and tighten
the two bolts. Put the two-piece natural gas
hose holders (Y) on the hose. Attach the natu-
ral gas hose holders (Y) to the bottom shelf (J)
with two M4x12 bolts (JJ). NOTE: Make sure
the natural gas hose exits through the hole in
the cart rear panel (W).
12
Hardware Used
Hardware Used
AA
AA
M6x16 Bolt
M6x16 Bolt
x 4
x 2
AA
C
G
G
AA
BB
DD
CC
M6
Spring
Qty. 2
M6
Qty. 2
M6x16
Bolt
Qty. 18
Washer
EE
M6x35
Bolt
Qty. 4
Washer
FF
M6
Wing Nut
Qty. 2
GG
M3x10
Bolt
Qty. 4
HH
M6x12
Flat Bolt
Qty. 8
Shoulder
Bolt
Qty.4
II
Qty. 1
Wrench
AA
BB
DD
CC
M6
Spring
Qty. 2
M6
Qty. 2
M6x16
Bolt
Qty. 18
Washer
EE
M6x35
Bolt
Qty. 4
Washer
FF
M6
Wing Nut
Qty. 2
GG
M3x10
Bolt
Qty. 4
HH
M6x12
Flat Bolt
Qty. 8
Shoulder
Bolt
Qty.4
II
Qty. 1
Wrench
AA
JJ
J
W
Y
Y
Y
JJ
M4x12 Bolt
x 2