Instructions / Assembly

17
LP Gas
Cylinder
Tank
Screw
Front View
Rear View
Front View
Rear View
ASSEMBLY INSTRUCTIONS
19. Open the door assembly (M). Place LP gas
cylinder (sold separately) into the nesting hole
located on the cart bottom shelf (J). Rotate
the LP gas cylinder until the hose/regulator
coupling aligns with the threaded valve of the
cylinder. Hand tighten the hose/regulator
coupling to the threaded valve of the LP
gas cylinder.
Tighten the tank screw clockwise in the
rear of the cart until the LP gas cylinder is
secured in place inside the nesting hole of the
cart bottom shelf (J).
19
Front View
Rear View
Fully Assembled
M
J