Use and Care Manual

14
ASSEMBLY INSTRUCTIONS
15
16
15. Insert two M6x16 bolts (AA) in left side of
the rebox assembly (B) as shown, leaving
5mm of threads exposed. Align key hole in
the left side shelf assembly (I) with the two
bolts just inserted in the rebox assembly (B),
and insert four M6x16 bolts (AA) in the
remaining holes in the rebox assembly (B).
Adjust the rebox assembly (B) correctly, then
tighten all bolts.
16. Place three heat tents (E) over each burner.
AA
Hardware Used
AA
M6x16 Bolt x 6
AA
AA
E