Use and Care Manual

13
13
14
ASSEMBLY INSTRUCTIONS
13. Carefully place the rebox assembly (B) onto
the cart left side panel assembly (M) and the
cart right side panel assembly (N). Adjust the
rebox assembly (B) so that the holes in the
rebox assembly (B) are aligned with holes in
the tabs of the cart left side panel assembly (M)
and the cart right side panel assembly (N).
Note: Make sure the gas hose/regulator
assembly is outside the cart. Secure the rebox
assembly (B) with four M6x16 bolts (AA).
AA
14. Insert two M6x16 bolts (AA) in right side of
the rebox assembly (B) as shown, leaving
5mm of threads exposed. Align key hole in the
right side shelf assembly (K) with the two bolts
just inserted in the rebox assembly (B), and
insert four M6x16 bolts (AA) in the remaining
holes in the rebox assembly (B). Adjust the
rebox assembly (B) correctly, then tighten all
bolts.
Hardware Used
Hardware Used
AA
AA
M6x16 Bolt
M6x16 Bolt
x 4
x 6
AA
AA
AA