Instructions / Assembly
Accidents are always tragic especially because so many of them could have been prevented with little care
and judgment. There are some basic good practices, we hope you will follow for safe use of your heater.
vapours and liquids.
times when the heater is operating.
necessary. Do not service while hot or operating.
do not convert heater to any other gas. Installation must conform to local codes or, in the absence of local
respectively. Use only the regulator & hose assembly provided with the heater. Inspect the regulator/hose
assembly prior to each use of the heater. If there is excessive abrasion or wear, or hose is cut, replace with
regulator/hose assembly listed on the parts list prior to using this heater.
Canada CSA C22.1, Canadian Electrical Code, Part 1. Use only a properly grounded three
operating cylinder.
supply to the heater.
PROPANE CONSTRUCTION HEATER
3 4
PRODUCT FEATURES
GENERAL SAFETY INSTRUCTION
IMPORTANT SAFETY INSTRUCTION
WARNING
: Motor and fan must be running before lighting, during operation and at shutdown,
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!