Warranty

ManualsBrandsDyna-Glo Delux ManualsHeating, Ventilation, and Air Conditioning100k-150k BTU Natural Gas Portable Heater

Printed in China

Dyna-Glo

Delux Natural

Gas Construction Heater

Operating Instructions & Parts Manual RMC-FA150NGDGD

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for

future reference.

Description

Dyna-Glo Delux model RMC-FA150NGDGD is a natural gas ﬁred construction

heater, having a built-in thermostat, and a 150,000 BTU/Hr rating. The heater

uses natural gas for com bustion and electricity to operate the motor and fan.

It is primarily to be used to temporarily heat well-ventilated buildings under

construction, alteration or repair. This heater should be utilized in sheltered, well-

ventilated areas, but never in occupied dwellings.

Speciﬁcations

Figure 1 – Model RMC-FA150NGDGD

Manifold Maximum Supply Minimum Supply Temperature

Model Pressure Pressure to Heater Pressure to Heater Control

RMC-FA150NGDGD 4” W.C. 1/2 PSI 5” W.C. Built-In Thermostat

Spark Plug Ignitor Gap Weight Size

Model Ignition Gap (Inches) (Inches) (Pounds) L x W x H (Inches)

RMC-FA150NGDGD Continuous spark .12 .12 18.6 (Heater) 25 x 9.4 x 15.5

22 (Shipping)

—

PROFESSIONAL GRADE

Table of Contents Page

Description .......................1

Speciﬁcations......................1

Unpacking ....................... 1

General Safety Information ........1-3

Principals of Operation..............3

Ventilation........................3

Installation........................4

Operation ........................4

Maintenance ....................4-5

Storage ..........................5

Wiring Diagram....................6

Repair Parts Illustration .............7

Repair Parts List....................7

Troubleshooting Chart ..............8

Warranty .........................9

Unpacking

1. Unpack all materials used to protect

the heater inside of carton. Retain

plastic caps attached to exposed

ﬁttings for use during storage.

2. Remove heater, accessories and all

hardware from carton.

3. Inspect all items for damage that may

have occurred during shipment.

General Safety Information

Make certain you read and understand

all warnings. Keep these instructions for

reference. They are your guide to safe

and proper operation of this heater.

Safety information appears throughout

these instructions. Pay close attention

to them. Below are deﬁnitions for the

safety information listed throughout

this manual.

DANGER

Indicates an

im minen tly

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

WARNING

Indicates a poten-

tially hazardous situation which, if not

avoided, COULD result in death or serious

injury.

CAUTION

Indicates a poten-

tially hazardous

situa tion which, if not avoided, MAY

result in minor or moderate injury.

IMPORTANT: Not every possible cir-

cumstance that might involve a hazard

can be anticipated. The warnings in this

manual and on tags or decals afﬁxed to

the unit are therefore not all-inclusive.

If a procedure, work method, or oper-

ating technique not speciﬁcally recom-

mend ed by is used, you must make sure

it is safe for you and others.

You should also ensure that equipment

will not be damaged or made unsafe by

the operating or maintenance method

you choose.

Consumer: Retain this manual for future

reference.

Output Rating Fuel Hot Air Output Electric Motor

Model BTU/Hr Fuel Consumption (CFM Approx) Motor Input Amperage

RMC-FA150NGDGD 150,000 Natural Gas Only 146 Cubic Ft/Hr 435 3440 RPM 120V/60Hz, 1/9 HP 0.7

ANS Z83.7-2011 CSA 2.14-2011 Construction Heater

Rev 2013-06-13

Summary of content (10 pages)

PAGE 1
RMC-FA150NGDGD Operating Instructions & Parts Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
PAGE 2
RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual Dyna-Glo Delux Natural Gas Construction Heater ® NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! E N G L I S H General Safety Information (Continued) General Hazard Warning: Failure to comply with the precautions and instructions provided with this heater can result in death, serious bodily injury, and property loss, or damage from hazards of fire, explosion, burn, asphyxiation, carbon monoxide poisoning, and/or electrical shock.
PAGE 3
Dyna-Glo Delux Operating Instructions and Parts Manual Model RMC-FA150NGDGD NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! General Safety Information (Continued) Principals of Operation TEMPERATURE CONTROL SYSTEM FUEL SYSTEM – This heater is equipped with a thermo stat. Heater may start at anytime. The pipe runs from the gas supply to the heater itself. After the gas runs through the pipe, it passes through the solenoid valve and out the nozzle into the combustion chamber.
PAGE 4
RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual Dyna-Glo Delux Natural Gas Construction Heater ® NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! E N G L I S H Installation WARNING Review and under stand all of the warnings in the Safety Information Section on pages 1–3. They are required to operate this heater safely. Follow all local and state codes when operating this heater. Be sure to test all connections for leaks after installation or service.
PAGE 5
Dyna-Glo Delux Operating Instructions and Parts Manual Model RMC-FA150NGDGD NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! section. Repair any leaks immediately. Maintenance (Continued) 2. Always keep heater clean. Clean the heater annually, or as often as needed to remove any dust or debris. When the heater becomes dirty, wipe it down with a damp cloth. 3. Keep the inside of the heater free from foreign objects and combustibles. 4. Have the heater inspected annually by a qualified service person.
PAGE 6
RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual Dyna-Glo Delux Natural Gas Construction Heater ® NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! Wiring Diagrams High Limit Switch Yellow Gas Valve White Spark Plug Back Pressure Switch Flame Control Black Blue Orange White Black Motor White Black White Yellow on / off Green White Thermostat Red E N G L I S H Black Flame Control Line Neut Valve Ground Flame Control Line Cord Flame Control Green If any original w
PAGE 7
RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual For Repair Parts, call 1-877-447-4768 Please provide following information: -Model number -Serial number (if any) -Part description and number as shown in parts list 1 3 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 26 4 5 8 6 E N G L I S H 9 2 10 7 12 25 18 24 23 13 14 11 27 21 Use only original WARNING replacement parts. This Heater must use design-specific parts. Do not substitute or use generic parts.
PAGE 8
RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual Dyna-Glo Delux Natural Gas Construction Heater ® NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! Troubleshooting Chart E N G L I S H Symptom Possible Cause(s) Corrective Action Fan does not turn when electrical connection is made 1. No electric power to heater 1. Check current to electric outlet. If voltage is correct, check power cord and extension cord for cuts and breaks 2. Be sure that housing is not damaged.
PAGE 9
Warranty Dyna-Glo Delux Operating Instructions and Parts Manual RMC-FA150NGDGD LIMITED WARRANTY: This limited warranty is extended to the original retail purchaser of this Forced Air/Convection/Radiant Heater and warrants against any defect in materials and workmanship for a period of one (1) year from the date of retail sale. GHP Group, Inc.
PAGE 10
WARRANTY REGISTRATION IMPORTANT: We urge you to fill out your warranty registration card within fourteen (14) days of date of purchase. You can also register your warranty on the internet at www.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the card for your records. GHP Group, Inc. 6440 W Howard St Niles, IL 60714-3302 Tel: (877) 447-4768 www.ghpgroupinc.com SAVE THIS CARD! Place Postage Stamp Here GHP Group, Inc.