User`s guide

MADYMO Coupling Manual Release 7.5

• When connecting, MADYMO expects the madymo3d_server to be running on the IP

address HOST_ADDRESS. It might connect to another server application when the port

on the host is providing another server application. In this case the MADYMO connects

successfully, but subsequently waits or terminates.

• Coupling is available for computers running in SMP mode, but not in MPP mode.

• Both MADYMO and MATLAB must be either 32-bits or 64-bits executables. Mixing 32-

bit and 64-bit executables is not supported.

See

MADYMO Reference Manual, section CONTROL_MATLAB_HOST, the MATLAB and the

Simulink User guide for further details. TASS BV is a partner of The MathWorks.