User`s guide

MADYMO Coupling Manual Release 7.5
Figure 9.2: Example of the Configuration Parameters.
6. Polling time [s] for the server to wait on the connection with MADYMO.
7. Integration time step, value of TIME_STEP defined for CONTROL_ANALYSIS.TIME.
9.3 Using MATLAB/ Simulink in combination with MADYMO
Open the MADYMO environment by typing
madymo75 -sh
This is only needed when MADYMO specific environment variables are used in the m-files.
An example of the coupling, see
Application Manual, is as follows:
• Open a command window (using either cmd or xterm).
• Go to the directory where the MADYMO model, the MATLAB/ Simulink model and the
startup.m files are located.
• Start MATLAB from the command window.
• The file startup.m is executed automatically.
53