User Guide GB Page 2 Guide D’Utilisation F Page 14 Gebruikershandleiding NL Pagina 28 Bedienungsanleitung D Seite 40 www.dymo.com Manual_RhinoPRO5000_WEU.
AC Power Connector Tape Exit LCD Display Cutter Lever Power Key Navigation Key Print Key Quick Access Keys Thumb Latch for Tape Compartment Backspace/Clear All Escape/Backlight Symbol Keys Function/Shift Function Keys Enter/OK Numeric Keys Alpha Keys Space Bar/ Symbol Key Thumb Latch for Battery Compartment Figure 1 RhinoPRO 5000 Printer 2 Manual_RhinoPRO5000_WEU.
About Your New Printer GB With your new DYMO RhinoPRO™ 5000 printer, you can create a wide variety of high-quality, selfadhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses DYMO RhinoPRO Industrial label cassettes in widths of 6 mm (1/4”), 9 mm (3/8”), 12 mm (1/2”), or 19 mm (3/4”). RhinoPRO label cassettes are also available in a wide range of materials. Visit www.dymo.com for information on obtaining tapes and accessories for your printer.
3. Close the battery compartment door. 4. To charge the battery pack, connect the AC adapter as described below. Remove cardboard insert Connecting the AC Adapter An optional AC power adapter can also be used to power the printer. Connecting the AC adapter to the printer disconnects the batteries as a power source. To connect the AC adapter 1. Plug the power adapter into the power connector on the top, left side of the printer.
Selecting a Language Several language-related features are determined by the language setting, such as availability of special characters and units of measure. See Using International Characters on page 7 for information about accessing international characters. To select a language 1. Press +2. 2. Use the arrow keys to select the language. 3. Press to set the language. Printing Your First Label You are now ready to print your first label. To print a label 1. Enter text to create a simple label. 2.
Function Key The Function key is used to select the function or symbol printed above a key. For example, when you press 2, the Font size menu appears in the display; however, if you press +2 together, the Language menu appears. To set the font size 1. Press 2. 2. Select a font size and press .
You can save up to eight labels in memory. To save a label 1. Type your label text. 2. Press to display the memory locations. Each memory location is represented by a box. Memory locations that contain a stored label are filled and when the cursor is positioned over a location, the contents are displayed. 3. Use the arrow keys to select an empty location. 4. Press to save the label. Recalling from Memory Once a label is saved to memory, you can recall the label to print or edit.
Printing Fixed Length Labels Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text. You can specify a fixed length for a label in 0.5 mm (0.2”) increments between 10 mm (0.4”) and 999.9 mm (40.0”). The preset fixed length is 40 mm (1.5”). Any change you make to the fixed length setting remains in effect until you change it. To set the label length 1. Press .
The default value is 17.5 mm (0.7”) and can be set in increments of 0.1 mm (0.005”). 3. Enter the total number of module blocks on one row and press . 4. Enter the size for each component (X=?) and press after each module. 5. Enter text for the first module and press G. 6. Press +0 to clear the text. 7. Repeat steps 5 and 6 until all module labels are printed. 8. Press + to feed the tape after the last module and then cut the label using the Cutter lever.
Adjusting Print Quality (Advanced) Serializing Your Labels You can print serialized labels numerically or alphabetically. Numbers and letters can be incremented from 1-99. You can serialize any number or letter by placing the cursor under the position to be incremented, such as the number 2 in 123 or the letter B in ABC. For example, with the cursor under the 2 in 123 and the increment #=3, the resulting labels would print as 123, 133, and 143.
Troubleshooting Review the following possible solutions if you encounter a problem while using your printer. Error Message/Problem Solution No display • Ensure the printer is turned on. • Replace discharged batteries. Poor Print Quality • • • • Poor Cutter Performance Clean the cutter blade. See Cleaning Your Printer. L=nnnn.n mm (or n.nn”) Fixed length setting is too small for text. • Set the fixed length to a size longer than the text, or • Decrease the amount of text.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards: US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204; EU Immunity - EN 55024 & addendums A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity Characteristics Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6:
Manual_RhinoPRO5000_WEU.
