Owner`s manual

24
DYMO
36
Computer shrouding
1
74
Computer face
sticker
1
37
Screw
ST4.2*20
4
75
Computer circuit
board
1
38
Computer
1
76
Screw
ST2.9*6.5
12
12. TROUBLE SHOOTING GUIDE
Fault Code
Main reason
Solution
E01
The wire from treadmill display to
bottom control board is not
connected
1． Check the connection wire between
computer and control board was well
connected.
2． Ensure the IC on the control board was
well inserted.
3． Abnormal power supply in control board.
Please replace control board.
E02
Protect the exploding
1． Bad contact with motor open circuit.
Please change a new motor or check the
connector.
2． Power tube was puncture. Please
change a new Power tube or control
board.
E05
Over current Protection
1． Overloaded
2． Running board experiencing heavy
resistance and needs to be oiled
3． Damage to motor, replace motor.
E06
Control board self-checking
E08
EEPROM damage
Change the control board