Label Maker User Manual

7
To load a label cassette
1 Press the button on the front of the printer to open the label
cassette tray.
NOTE The first time you use the printer, remove the protective
cardboard insert from the label exit slot. See Figure 9.
2 Make sure the label and ribbon are taut across the mouth
of the cassette and that the label passes between the
label guides.
If necessary, turn the ribbon rewind spool clockwise to tighten
the ribbon.
3 Insert the cassette and press firmly until the cassette clicks
into place. Make sure label and ribbon are positioned
correctly. See Figure 10.
4 Press the button on the front of the printer to close the label
cassette tray.
Remove
cardboard
insert
Figure 9
Push down gently
Figure 10