User guide

22
Create a Two-Sided Label
You can quickly create a two-sided label using the mirror text effect in DYMO Label software.
When you apply this effect, a mirror image of the contents of the object is placed above the original
contents. This is useful for creating two-sided file folder labels using address labels or for creating
tent-shaped cards for place cards.
The mirror effect can be applied to Address, Text, Counter, and Date and Time objects.
To create a two-sided file folder label
1 Create an address label that contains a Text object.
2 If necessary, resize the Text object so that the object fills the label.
3 Enter the text for your label in the Text object.
4 Right-click the object and choose Properties.
The Text Object Properties dialog box appears.
5 Under Text effects, select the Mirror check box, and then click OK.
A mirror image of the text is added to your label.
6 Click .
7 Place the label on your file folder so that the center of the label folds over the top of the
file folder.
The text is visible from both sides of the folder.
Add Your Own Logo
You can select an image file to use as your default logo. Once you have set your default logo file,
you can quickly add the selected image to any label you create.
To add a logo or custom image
1 Double-click Image on the Designer tab.
The Image Object Properties dialog box appears.
2 Select Use default logo file under Select image source.
3 Select the desired alignment, scale, and border options for the image, and then click OK.
Your default logo is added to your label.