Contents About Your New Label Maker......................................................................... 5 Product Registration........................................................................................................5 Getting Started............................................................................................. 5 Connecting the Power......................................................................................................5 Inserting the Batteries.................
Using Symbols and Special Characters.......................................................... 12 Adding Symbols.............................................................................................................12 Adding Punctuation.......................................................................................................14 Using the Currency Key..................................................................................................14 Adding International Characters..........
17 18 19 20 21 22 23 1 2 16 15 14 3 4 5 6 7 8 13 12 11 10 9 Figure 1 LabelManager 210D Electronic Label Maker 1 2 3 4 5 6 7 8 Tape cutter button Print Save OK Number lock Backspace Currency Return 9 10 11 12 13 14 15 16 Accented character Punctuation Space bar Insert CAPS Format Settings Power 17 18 19 20 21 22 23 AC power connector Clear Recall Navigation LCD display Cancel Preview LM210D_manual_UK-WEU.
About Your New Label Maker With the DYMO LabelManager 210D electronic label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 6 mm, 9 mm, or 12 mm. These tape cassettes are available in a wide range of colors. Visit www.dymo.com for information on obtaining labels and accessories for your label maker. Product Registration Visit www.dymo.
Connecting the Optional Power Adapter An optional 9 Volt, 1.5 A power adapter can also be used to power the label maker. Connecting the AC adapter to the label maker disconnects the batteries as a power source. To connect the power adapter 1. Plug the power adapter into the power connector on the top, left side of the label maker. . Plug the other end of the power adapter into a power outlet. x Make sure the label maker power is turned off before you disconnect the power adapter from the main power source.
Using the Label Maker for the First Time The first time you turn on the power, you are asked to select the language and units of measure. These selections will remain set until you change them, or until the label maker is reset. You can change these selections using the Settings key. To set up the label maker 1. Press { to turn on the power. . Select the language and press }. By default, the language is set to English. The language option you choose determines the character set that is available. .
LCD Display You can enter up to 99 characters and spaces. The display shows about thirteen characters at a time. The number of characters displayed will vary due to proportional spacing. With DYMO’s exclusive graphical display, most of the formatting you add is visible instantly. For example, the italics and rounded border added to the text below is clearly displayed. Feature indicators along the top of the LCD display appear black to let you know when a feature is selected.
Num Lock The key provides access to the numbers located on some of the alphabetic keys. When Num Lock mode is turned on, the Num Lock indicator is shown on the display and the numbers 0 through 9 appear when you press the corresponding letter keys. Num Lock is turned off by default. Backspace The 0 key removes the character to the left of the cursor. Clear The 6 key gives you a choice to clear all label text, just the text formatting, or both.
Adding Font Styles You can choose from six different font styles: AaBbCc AaBbCc AaBbCc a Normal Bold Italic Outline Shadow Vertical The style you select applies to all characters. Styles can be used with alphanumeric characters and some symbols. To set the font style 1. Press 2. . Select Style and press }. . Select a font style and press }. Adding Borders and Underline Styles You can highlight your text by choosing a border or underline style.
To add a border style 1. Press 2. . Select Borders and press }. . Select a border style and press }. When using borders on two-line labels, both lines are enclosed in one border. To add an underline 1. Press 2. . Select Underline and press }. . Press } again when the underlined text is shown in the display. On two-line labels, both lines are underlined. Creating Two-Line Labels You can print a maximum of two lines on labels. To create a two-line label 1. Type the text for the first line and press D.
Creating Fixed-Length Labels Normally, the length of the label is determined by the length of the text. However, you can choose to set the length of the label for a specific application. When you choose a fixed label length, the label text is automatically resized to fit the label. If the text cannot be adjusted to fit within the fixed label length, a message is displayed showing the smallest possible label length for this text. You can choose a fixed length label up to 400 mm long.
(Subscripts/Superscripts) To insert a symbol 1. Press 8, select Symbols, and press }. . Select the symbol category and press }. . Use the left and right arrow keys to move to your desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbol types. 4. When you locate the symbol, press } to add the symbol to your label. LM210D_manual_UK-WEU.
Adding Punctuation You can quickly add punctuation using the punctuation shortcut key. To insert punctuation 1. Press . . Select the punctuation mark you want and press }. Using the Currency Key You can quickly add a currency symbol using the currency shortcut key. 1. Press . . Select the currency symbol you want and press }. Adding International Characters The label maker supports the extended Latin character set using RACE technology.
To preview your label • Press 5. The label length is displayed, then the text of the label scrolls across the display. Printing Multiple Labels Each time you print, you are asked how many copies to print. You can print up to ten copies at one time. To print multiple labels 1. Press G. . Select the number of copies to print. . Press }. When printing is finished, the number of copies to print returns to the default value of 1.
To save the current label 1. Press 3. The first available memory location is displayed. Use the arrow keys to move through the locations. You can store new text in any of the memory locations. . Select a memory location and press }. Your label text is saved and you are returned to the label. Opening Saved Labels You can easily open labels saved in memory to use at a later time. To open saved labels 1. Press 4. A message is displayed to confirm you want to overwrite the current label. . Press }.
Caring for Your Label Maker Print head Your label maker is designed to give you long and Cutter button trouble-free service, while requiring very little maintenance. Clean your label maker from time to time to keep it working properly. Clean the cutter blade each time you replace the tape cassette. To clean the cutter blade 1. Remove the tape cassette. Figure 6 . Press and hold down the cutter button to expose the cutter blade. See Figure 6. .
Troubleshooting Review the following possible solutions if you encounter a problem while using your label maker. Problem/Error Message Solution No display • Ensure the label maker is turned on. • Replace discharged batteries. Poor Print Quality • Replace batteries or attach power adapter. • Set Contrast to higher level. See Adjusting the Print Contrast. • Ensure tape cassette is installed properly. • Clean the print head. • Replace the tape cassette. Poor Cutter Performance Clean the cutter blade.
DYMO D1 Label Cassettes Width: Length: 6 mm 7m S0720770 9 mm 7m S0720670 Blue/Clear ___ ___ Red/Clear ___ ___ S0720780 S0720680 S0720530 Blue/White ___ S0720690 S0720540 Red/White ___ S0720700 Black/Blue ___ S0720710 Black/Red ___ S0720720 Black/Yellow S0720790 S0720730 Black/Clear Black/White 43610 43613 43618 40910 40913 40914 40915 40916 40917 40918 12 mm 7m S0720500 45010 S0720510 45011 S0720520 45012 45013 45014 S0720550 45015 S0720560 45016 S0720570 45017 S0
Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides.
Environmental Information The equipment that you have bought requires the extraction and use of natural resources for its production. It may contain substances that are hazardous to health and the environment. In order to avoid the dissemination of those substances in our environment, and to diminish the pressure on natural resources, we encourage you to use the appropriate take-back systems.
LM210D_manual_UK-WEU.
CONTACTING CUSTOMER SUPPORT Country United Kingdom Ireland France Nederland België - Belgique Deutschland Österreich Schweiz - Suisse Sverige Norge Danmark Suomi Italia España Portugal Polska Magyar Česká republika Slovenská republika Australia New Zealand Hong Kong International LM210D_manual_UK-WEU.
©2007 DYMO A Newell Rubbermaid company 931264 _3 DYMO bvba Industriepark-Noord 30 9100 Sint-Niklaas Belgium www.dymo.com 24 LM210D_manual_UK-WEU.
