Specifications

Pricing FABRIC wrapped mats and liners
This pricing method takes several factors into consideration, to calculate the correct fabric selling price.
This method will work for both framer wrapped or vendor wrapped sales. The grain direction, max bolt
width, substrate, and 2 inch wrap allowance are all taken into consideration. This tip assumes that you
have already set up the desired vendors in the fabric, mat, and moulding sections of LifeSaver.
>Pricing Fabric Covered Mats:
From the FRAME-IT screen:
-Enter project dimensions, frame ID, etc; as usual
-Enter the substrate MAT ID in field 1. example: B8647 (optional step, if being wrapped by framer)
-Enter the FABRIC ID (Vendor ID + Fabric ID) in the next available MAT/FILLET/FABRIC field.
Examples: RP325 (Raphaels "325"), FFE-10070 (Franks "10070"), FFAMBR-BISQ (Framing Fabrics "AMBR-BISQ")
-Tab to the next field to answer additional questions about substrate, grain direction, mounting, etc.
Tip: To specify a SPECIFIC substrate mat ID #, enter this mat ID in the field prior to where the fabric ID is entered.
A prompt will appear, with the option to use the mat in the previous field as a substrate.
>Pricing Fabric Covered Liners:
From the FRAME-IT screen:
-Enter project dimensions and outer/first frame ID; as usual
-Enter the (Vendor ID, Profile ID, and Fabric ID) code in the next available moulding field.
Examples: RPA-521 (Raphaels "A" profile, with fabric "521"), FE-5310070 (Franks "53" profile, with fabric "10070"),
FFBV02-AMBR-BISQ (Framing Fabrics "BV02" profile, with fabric "AMBR-BISQ")
Tip: To specify a premium charge for NS(NO SEAMS) / CC(Continuous covering), toggle the FIELD ID button several
times; until it says "O". (example: 2: C: L: J: O:)→ → → →
Stacked Moulding Glazing Tip: If you right click the moulding field, you can specify which moulding will be
fitted with glazing. This is useful when glazing is to be placed over a liner or other inside moulding.
The previous entry method is also available, without the above-mentioned benefits:
Examples of Direct Entry Fabric Mat codes: (old method, not as accurate)
R1005-4M (Raphael's fabric "1005", covering a 4-ply mat)
R1005-8M (Raphael's fabric "1005", covering an 8-ply mat))
FFE-10070-4 (Frank's fabric "10070", covering a 4-ply mat)
FFE-10070-8 (Frank's fabric "10070", covering an 8-ply mat)
FFE-10070-E (Frank's fabric "10070", covering an embossed mat)
FFAMBR-BISQ-4P (Framing fabrics "AMBR-BISQ", covering a 4-ply mat)
FFAMBR-BISQ-8P (Framing fabrics "AMBR-BISQ", covering an 8-ply mat)
FFAMBR-BISQ-AC (Framing fabrics "AMBR-BISQ", with acid free)
FFAMBR-BISQ-FO (Framing fabrics "AMBR-BISQ", with fomecore)
Examples of Direct Entry Fabric Liner codes: (old method, not as accurate)
RPA-1620 (Raphael's profile "A", with fabric "1620")
RPA-1620-CC (Raphael's profile "A", with fabric "1620", w/Continuous Covering)
FE-5310070 (Frank's profile "53", with fabric "10070")
FE-5310070-NS (Frank's profile "53", with fabric "10070", w/No Seams)
FFBV02-AMBR-BISQ (Framing fabrics profile “BV02”, with fabric “AMBR-BISQ”)
Note: See vendor provided charts for available fabric and liner profile codes
Detailed guides and training videos can be found on the LifeSaver website. Links: Raphaels Franks
LifeSaver Tips & Tricks compiled by customer Mike Labbe www.getthepictureframing.com
LifeSaver Software and the LifeSaver Software logo are registered trademarks of LifeSaver Software, Inc. Canton, GA USA 800-381-0600 www.lifesaversoftware.com 5