Contents About Your New Label Maker............................................................... 5 Product Registration...........................................................................................5 Getting Started.................................................................................. 5 Connecting the Power.........................................................................................5 Inserting the Tape Cassette............................................................
Troubleshooting................................................................................14 DYMO D1 Tape Cassettes.....................................................................15 Documentation Feedback..................................................................16 Environmental Information...............................................................17 120P manual UK_WEU.
16 17 18 19 20 21 1 15 14 13 12 2 3 4 5 6 OK C a nc e l 11 7 10 9 8 Figure 1 LabelManager 120P Electronic Label Maker 1 2 3 4 5 6 7 Tape cutter button Print OK Size Num lock Backspace Accented character 8 9 10 11 12 13 14 Border Space bar Vertical CAPS Bold Cancel Settings 15 16 17 18 19 20 21 On/Off Symbols Navigation Underline LCD display Preview Tape exit 4 120P manual UK_WEU.
About Your New Label Maker With the DYMO LabelManager 120P electronic label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in several different font sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 9 mm or 12 mm. These tape cassettes are available in a wide range of colors. Visit www.dymo.com for information on obtaining labels and accessories for your label maker. Product Registration Visit www.dymo.
Inserting the Tape Cassette Your label maker comes with one tape cassette. You can purchase additional tape cassettes from your local office supply retailer. To insert the tape cassette 1. Lift the tape cassette cover to open the tape compartment. See Figure 3. x Before using the label maker for the first time, remove the protective cardboard insert from the tape exit slot. See Figure 4. 2. Insert the cassette with the label facing up and the tape positioned Guideposts between the guideposts.
To set up the label maker 1. Press { to turn on the power. 2. Select the language and press }. By default, the language is set to English. The language option you choose determines the character set that is available. 3. Select inches or mm and press }. 4. Select the width of the tape cassette currently inserted in the label maker. You are now ready to print your first label. To print a label 1. Enter text to create a simple label. 2. Press G. 3. Press the cutter button to cut the label.
LCD Display You can enter up to 99 characters and spaces. The display shows about thirteen characters at a time. The number of characters displayed will vary due to proportional spacing. With DYMO’s exclusive graphical display, most of the formatting you add is visible instantly. For example, the border added to the text below is clearly displayed. Feature indicators along the top of the LCD display appear black to let you know when a feature is selected.
Num Lock The key provides access to the numbers located on some of the alphabetic keys. When Num Lock mode is turned on, the Num Lock indicator is shown on the display and the numbers 0 through 9 appear when you press the corresponding letter keys. Num Lock is turned off by default. Navigation Keys You can review and edit your label using the left and right arrow keys. You can also navigate through menu selections using the up and down arrow keys, and then press } to make a selection.
Adding Font Styles You can choose from three different font styles: AaBbCc AaBbCc a Normal Bold Vertical The style you select applies to all characters. Styles can be used with alphanumeric characters and some symbols. The font style keys toggle the style on and off. To add bold text Press for bold text. To print a vertical label for vertical text. Press Adding a Border or an Underline You can highlight your text by using a border or underline.
Using Symbols and Special Characters Symbols, punctuation, and other special characters can be added to your labels. Adding Symbols The label maker supports the extended symbol set shown below. Position in row To insert a symbol 1. Press . 2. Use the left and right arrow keys to move to your desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbol types. 3.
Adding International Characters The label maker supports the extended Latin character set using RACE technology. After pressing the key, repeatedly pressing a letter scrolls through the available variations of that letter. For example, if French is selected as the language and you press the letter a, you will see a à â æ and so on through all the variations available. The character variations and the order in which the variations appear depend on the language you use. To add accented characters 1. Press .
Adjusting the Print Contrast You can adjust the print contrast to fine tune the print quality of your label. To set the contrast 1. Press . 2. Select Contrast and press }. 3. Use the arrow keys to select a contrast setting between 1 (less contrast) and 5 (more contrast), and press }. Caring for Your Label Maker Your label maker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your label maker from time to time to keep it working properly.
Troubleshooting Review the following possible solutions if you encounter a problem while using your label maker. Problem/Error Message Solution No display • Ensure the label maker is turned on. • Replace discharged batteries. Poor Print Quality • Replace batteries. • Set Contrast to higher level. See Adjusting the Print Contrast. • Ensure tape cassette is installed properly. • Clean the print head. • Replace the tape cassette. Poor Cutter Performance Clean the cutter blade.
DYMO D1 Tape Cassettes Width: Length: Black/Clear 9 mm 7m S0720670 12 mm 7m S0720500 Blue/Clear ___ S0720510 Red/Clear ___ S0720520 Black/White S0720680 S0720530 Blue/White S0720690 Red/White S0720700 Black/Blue S0720710 Black/Red S0720720 Black/Yellow S0720730 Black/Green S0720740 White/Clear ___ S0720600 White/Black ___ S0720610 Width: Length: 9 mm 3,5 m Flexible labels for curved surfaces ___ 12 mm 3,5 m S0718040 Width: Length: 9 mm 5,5 m Permanent labels ___ 120P
Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides.
Environmental Information The equipment that you have bought requires the extraction and use of natural resources for its production. It may contain substances that are hazardous to health and the environment. In order to avoid the dissemination of those substances in our environment, and to diminish the pressure on natural resources, we encourage you to use the appropriate take-back systems.
120P manual UK_WEU.
Contacting customer support Country United Kingdom Ireland France Nederland België - Belgique Deutschland Österreich Schweiz - Suisse Sverige Norge Danmark Suomi Italia España Portugal Polska Magyar Česká republika Slovenská republika Australia New Zealand Hong Kong International 120P manual UK_WEU.
931482 ©2007 DYMO A Newell Rubbermaid company 20 120P manual UK_WEU.indd 20 DYMO bvba Industriepark-Noord 30 9100 Sint-Niklaas Belgium www.dymo.
