Specifications

TERMINATION TOOLS / C-2
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
Fiber Optic Scribes
HAND TOOLS
Miller
DS-60-C & DS-90-W Diamond-Tip Scribes
• Quality fiber optic scribes featuring a protective retractable barrel with pocket clip and a stainless steel
mounted diamond tip in your choice of conical or wedge shapes.
• These scribes are specially made for the “scratch and pull” technique of scribing optical fiber. The wedge shape
provides a more durable edge.
Miller
CS-30-W Carbide-Tip Scribe
• The CS-30-W is a 30-degree wedge-tip carbide scribe 3.8mm wide for long life and simple fiber termination
• Housed in a rugged, anodized aluminum casing 112mm long and 25mm in diameter, the CS-30-W fits
comfortably in either hand and in your pocket or tool kit
• The CS-20-W includes a convenient pocket clip and soft, brightly colored, protective “Squeeze and Pull” cap
for easy and quick tool selection.
Miller
CS-30-DE Double End Carbide-Tip Scribe
• Reversible carbide blade edged on both ends to double the life of the tool
• 5mm wide blade wider than conventional scribe blades for greater visibility
• “Soft feel” grip on rugged anodized aluminum casing
• Hex-shaped end to prevent scribe from rolling off work table
• Plastic cap protects blade when tool is not in use
• Convenient pocket clip
• Carbide Blade Replacement Part No.: 46122
Ideal
Ruby, Sapphire & Carbide “Reversable” Scribes
• Professional quality blade styles to choose from to meet specific needs
• Easy handle identification: Ruby = Red / Sapphire = Blue / Carbide = Black
• 30 degree single bevel - DualScribe™ reversible blade doubles tool life
• Soft non-slip grip provides precise control during scribing
• Clear safety cap protects the blades from damage when not in use
Bruce Diamond
Diamond & Sapphire Scribes
• Features the best surface finish attainable
• Optimum cutting edge that lends itself to high accuracy and long life
• Wedge or Cone tips
• Available in Pen & Cap or Twist-Retractable Form
Molex Fiber Optics
Connector Cleave Tools
The Molex cleave tool is designed to repeatedly and accurately cleave the fiber at a controlled length just above
the surface of the ferrule. This eliminates the need for a bead of epoxy and extensive operator training. The result
is a substantial reduction in polishing time and a significant improvement in production yield.