Specifications

PRODUCTION CLEANING SYSTEMS / E-2
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
PRODUCTION EQUIPMENT
Connector Cleaning SystemsConnector Cleaning Systems
Westover CleanBlast
Bench-Top and Portable Connector Cleaning Systems
Westover Scientific’s line of CleanBlast™ systems provide rapid, controlled cleaning and
removal of contamination from fiber optic connector end-faces. This patent-pending design
utilizes a connector interface that creates a flow of highly-filtered gas across the surface of
the fiber. A solvent is then introduced and atomized to create a cleaning mist. All exhaust is
reclaimed through a controlled retrieval circuit. The quick-drying solvent used is
non-flammable, non-conductive, and residue-free.
• Faster, more effective, and less costly than using swabs or other methods.
• Excellent at removing - instead of spreading - debris and oils around the ferrule surface.
The Bench-Top Systems are most commonly used in production, manufacturing, and QC
environments. They are high-throughput, low-maintenance systems and require a clean,
compressed air source. The Portable series are complete systems contained inside a rugged
Pelican® 1450 transport case. They are ideal for mobile and field applications or for areas
where there is no regulated, compressed air supply available - the Portable series contain a
built-in compressor.
Patchcord Cleaning System
The Patchcord cleaning module is connected to a CleanBlast™ Bench-Top System base unit via a 5 ft. umbilical hose,
and precision interchangeable cleaning Adapters allow for cleaning of connectors on a patch cord. The Patch Cord
module can be secured to a workbench using the mounting holes located on the base of the unit.
Part Number Output Description
FCL-B3000 Analog
CleanBlast™ Bench-Top System; Dual Bulkhead and Patch Cord module, Univ. 2.5mm
tip & Adapter
FCL-B4000 Analog CleanBlast™ Bench-Top System; Patch Cord Module; Univ. 2.5mm Adapter
FCL-B4100 Digital CleanBlast™ Bench-Top System; Patch Cord Module; Univ 2.5mm Adapter
Ordering Information
Bulkhead Backplane Connector Cleaning System
The bulkhead handset was designed to clean connectors that are mounted with bulkheads, devices, or alignment
sleeves using the CleanBlast™ tips. This handset can also be used to clean patch cords with the use of compatible
CleanBlast™ Mating Adapters.
Part Number Output Description
Bench-Top Systems
FCL-B1000 Analog CleanBlast™ Bench-Top System; Bulkhead Handset; Univ. 2.5mm tip
FCL-B1000-22 Analog CleanBlast™ Bench-Top System; Bulkhead Handset; Univ 2.5mm tip; 22’ Umbilical
FCL-B1100 Digital CleanBlast™ Bench-Top System; Bulkhead handset; Univ. 2.5mm tip
Portable Systems
FCL-P1100 Digital CleanBlast™ Portable System; Bulkhead handset; Univ. 2.5mm tip
FCL-P1100-08 Digital CleanBlast™ Portable System; Bulkhead handset; Univ. 2.5mm tip; 8’ umbilical
Ordering Information