Specifications

POLISHING MACHINES / D-11
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
PRODUCTION EQUIPMENT
Domaille Polishing Machines
ABRASAVE Fixtures
Domaille Engineering is pleased to announce the ne ABRASAVE fixture line, the most revolutionary fiber
optic polishing equipment solution in decades. This patent pending, mathematically derived design
maximizes polishing film usage, allowing for up to a 50% reduction in polishing time while also extending
the life of your polishing film media usage by up to 100%.
This fixture line is available in the standard dimensions of previous Domaille fixtures but is also available
in a new, square shape that is compatible with both Domaille and Seikoh Giken polishing machines.
Standard Shape Square Shape Description
PFA-FC-18 SFA-FC-18 FC - 18 Pos
PFA-SC-18 SFA-SC-36 SC - 18 Pos Std. / 36 Pos Sqr.
PFA-ST-18 SFA-ST-18 ST - 18 Pos
PFA-LCF-18 SFA-LCF-36 LC - 18 Pos Std. / 36 Pos Sqr.
NA SFA-LCDX-18 LC Duplex - 18 Pos
Ordering Information
Cam-Lock Fixtures
The Dual Cam-Lock fixture was developed to provide a machine polishing solution for pin and socket style
connectors that were otherwise left to hand polishing. This plate is available for standard mil spec 38999
contacts as well as broadcast SMPTE, ARINC and TFOCA contacts. Standard diameters include 2.5, 2.0, 1.8,
1.6, 1.25 and 1.0mm, but custom diameters, shapes and geometries can be manufactured. The single hole
version allows for one diameter ferrule and the two hole version gives you the option of having two
different diameter ferrules.
Part Number Description
PF-xxDCL-12 12 Position Dual Cam-Lock (single hole size)
PF-xx-yyDCL-12 12 Position Dual Cam-Lock (two hole sizes)
PFA-xxDCL-12 ABRASAVE 12 Position Dual Cam-Lock (single hole size)
PFA-xx-yyDCL-12 ABRASAVE 12 Position Dual Cam-Lock (two hole sizes)
SFA-xxDCL-18 ABRASAVE Square 18 Position Dual Cam-Lock (single hole size)
SFA-xx-yyDCL-18 ABRASAVE Square 18 Position Dual Cam-Lock (two hole sizes)
SF-CL-020 Height Setting Fixture with .020” protrusion (single or dual hole)
SF-CL-030 Height Setting Fixture with .030” protrusion (single or dual hole)
Ordering Information
Prototype Fixtures
Specially designed for prototyping connectors, this unique fixture has a universal base which can hold up
to four different standard or custom inserts for process development of new connectors. It can also be
used for reqorking low quantities of connectors or to support low volumes of custom connectors.
Part Number Description
PF-VC-4 Universal Prototype Fixture Base. Requires four (4) inserts for operation.
VC-XX Universal Prototype Fixture Insert (standard/straight)
VC-XXA Universal Prototype Fixture Insert (custom/angle)
Ordering Information