Specifications

POLISHING MACHINES / D-6
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
PRODUCTION EQUIPMENT
Seikoh Giken Polishing Machines
Part Number Description Part Number Description
PH07-PL-6 LC PH07-PL8A-6 LC/APC
PH07-PM-6 MU PH07-PM8A-6 MU/APC
PH07-SP-6 ST PH07-CP-6 SC
PH07-CP8A-6 SC/APC step PH07-CP8C-6 SC/APC conical
PH07-FP-6 FC
PH07-FP8R-6 FC/APC step - narrow key PH07-FP8N-6 FC/APC step - wide key
PH07-FP8RC-6 FC/APC conical - narrow key PH07-FP8NC-6 FC/APC conical - wide key
PH07-FLM-6 1.25mm Zr Ferrule PH07-FF-6 2.5mm Zr Ferrule
PH07-FF8A-6-1.5
2.5mm/APC Zr Step Ferrule
1.5mm Flange
PH07-FF8A-6-1.3
2.5mm/APC Zr Step Ferrule
1.3mm Flange
PH07-FF8C-6-1.5
2.5mm/APC Zr Conical Ferrule
1.5mm Flange
PH07-FF8C-6-1.3
2.5mm/APC Zr Conical Ferrule
1.3mm Flange
6 Position - IPC*
*Seikoh Giken's Independent Pressure Control (IPC) Connector Plates allow the operator to use any of the plate's ports in any
configuration. Most plates require the connectors to be placed in a symmetrical pattern to produce even polishes. With IPC plates,
ferrules are given even polishes regardless of how they are placed in the plate.
SFP-70D Polishing Fixtures
Part Number Description Part Number Description
PH072-PL-2 LC PH072-PL8A-2 LC/APC
PH072-PM-2 MU PH072-PM8A-2 MU/APC
PH072-SP-2 ST PH072-CP-2 SC
PH072-CP8A-2 SC/APC step PH072-CP8C-2 SC/APC conical
PH072-FP-2 FC PH072-M5P SMA 905 (Not I.P.C.)
PH072-FP8R-2 FC/APC step - narrow key PH072-FP8N-2 FC/APC step - wide key
PH072-FP8RC-2 FC/APC conical - narrow key PH072-FP8NC-2 FC/APC conical - wide key
PH072-FLM-2 1.25mm Zr Ferrule PH072-FF-2 2.5mm Zr Ferrule
PH072-FF8A-2-1.5
2.5mm/APC Zr Step Ferrule
1.5mm Flange
PH072-FF8A-2-1.3
2.5mm/APC Zr Step Ferrule
1.3mm Flange
PH072-FF8C-2-1.5
2.5mm/APC Zr Conical Ferrule
1.5mm Flange
PH072-FF8C-2-1.3
2.5mm/APC Zr Conical Ferrule
1.3mm Flange
PH072-EF-2-HS E2000 Ferrule Holder - H&S PH072-EF2-RS E2000 Ferrule Holder - R&D
PH072-MT-1 Single Position MT
2 Position - IPC*
SFP-70D2 Polishing Fixtures