Specifications

POLISHING MACHINES / D-3
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
PRODUCTION EQUIPMENT
Seikoh Giken Polishing Machines
Part Number Description
SFP-550 SFP-550 Polishing Machine Including Standard Accessories Kit
SFP-550S SFP-550S Polishing Machine Including Standard Accessories Kit
SFP-550E SFP-550E Polishing Machine Including Standard Accessories Kit
Ordering Information
Part # Description Qty Part # Description Qty
FP-IM12 Operating Manual 1 FP-PM12 Process Manual 1
FP-MM12 Maintenance Manual 1 FP-F2A 2 Amp Fuse 2
FP-TS Hexagon Wrench 1 FP-CH Cable Hanger 1
PS5X-500-00 5.0mm Sponge Pad 3 PR5X-500-80 5.0mm Rubber Pad 3
GA5D Adhesive Removal 50 DR5D-9u Rough Polish Film 2
DJ5D-1u Middle Polish Film 2 XF5D Final Polish Film 10
FP-CS55 Coil Spring 4
SFP-550 Only
PR5X-500-85 5.0mm Rubber Pad 3
SFP-550S & 550E Only
PR5X-500-90 5.0mm Rubber Pad 1 PR5X-508-90 5.8mm Rubber Pad 1
PR5X-480-80 4.8mm Rubber Pad 1 PL50 Polishing Liquid 1
Standard Accessories Kit
SFP-550 Polishing Machine Kits
All Seikoh Giken polishing machines are sold in kits so they are ready to polish right out of the box. See below for
the machine part number and their respective kits.
Durometer
Thickness
5.0mm 2.5mm 4.5mm 4.8mm 5.05mm 5.08mm
95 PR5X-500-95 -- -- -- -- --
90 PR5X-500-90 PR5X-250-90 PR5X-450-90 PR5X-480-90 -- --
85 PR5X-500-85 -- -- -- -- --
80 PR5X-500-80 PR5X-250-80 -- PR5X-480-80 PR5X-505-80 --
75 PR5X-500-75 -- -- -- -- --
70 PR5X-500-70 PR5X-250-70 -- PR5X-480-70 PR5X-505-70 --
65 PR5X-500-65 -- -- -- -- --
60 PR5X-500-60 PR5X-250-60 -- -- -- --
50 -- PR5X-250-50 -- -- -- --
40 -- -- -- -- -- PR5X-508-40
5” Rubber Pads (sets of 3)
Thickness
5.0mm 4.9mm 4.8mm 4.5mm 4.0mm 3.5mm 2.4mm
PG5X-500-00 PG5X-490-00 PG5X-480-00 -- -- -- PG5X-240-00
-- PG5X-490-MT -- PG5X-450-MT PG5X-400-MT PG5X-350-MT --
5” Glass Plates (sets of 3)
- 00 suffix denotes the standard, rubber backed glass pad
- MT suffix denotes the non-rubber backed glass pad for MT processes