Specifications

EPOXY PREPARATION, DISPENSING & CURING / B-6
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
Epoxy Spot Curing
PRODUCTION EQUIPMENT
iCure™
AS200 Thermal Spot Curing System
The iCure AS200 is a thermal spot curing system that uses light to generate thermal energy
to cure conventional heat cure adhesives. The unit provides a versatile and cost effective
solution that delivers high optical energy with a significant amount of Infra Red radiation that
is readily absorbed by thermal adhesives resulting in faster and stronger cures. A sophisticated
on board micro-processor monitors system performance, allows for a user friendly flexible
interface and offers a range of reporting features.
Features & Benefits
• Reduce curing time by over 75%
• 200 W lamp with up to 80 W/cm
2
• Significant infrared contribution where heat cure adhesives have the most absorption
• SmartSense™ system monitoring to extend lamp life and performance
• Wide, state of the art touch screen with intuitive graphical user interface
• Can be used as benchtop or rackmount (self-orienting display)
• Hot strike prevention to protect lamp
• Shutter with 100ms response time
Lamp 200 Watt UHP Mercury Vapor Arc
Rated Lamp Life > 1000 hours (continuous operation)
Optical Spectrum 400 - 3600nm
Output Irradiance Full optical spectrum, 80 W/cm
2
Lightguide 1m length, 3.6mm diameter output (other configurations available)
Lightguide Bend Radius 10 cm
Spot Size 3.6 mm at the output of the lightguide
Warm-up Period 90 seconds (typical)
Power 85-240 VAC 50/60 Hz
Control Panel Touch Screen
Dimensions (L x W x H) 13.3” x 7.1” x 7.9” (33.8cm x 18cm x 20.1cm)
Weight 9.9 lbs (4.5 kg)
Technical Specifications
Part Number Description
AS200 iCure AS200 Thermal Spot Curing System
Ordering Information