Specifications

HAND-HELD OPTICAL MEASUREMENT DEVICES / G-10
Specifications may change without notice
Email: [e-mail] / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER [phone]
CONTACT INFO
Optical Measurement Devices
TEST & INSPECTION
JDSU Inspection, Cleaning & Test Kits
Part Number Description
FIT-S001
LAN/WAN - OLS-5, OLS-6, OLP-5, VFL, 200X FBE Probe, Hardwired to HD3 Display. Tips: SC, LC, ST, U25M,
U12M, cleaning materials, patch cords and deluxe carrying case.
FIT-S002
CATV/TELCO - OLS-6,OLP-8,VFL, 200X FBE Probe, Hardwired to HD3 Display. Tips: SC, LC, SC-APC, FC,
U25M, U25MA, U12M, cleaning materials, patch cords and deluxe carrying case.
FIT-S003
FTTx - OLS-55, OLP-57, VFL, 200/400X FBP Probe, Hardwired to HD3 Display. Tips: SC, SC-APC, U25M,
U25MA, cleaning materials, patch cords and deluxe carrying case.
FIT-S004
Data Center - OLS-5, OLS-6, OLP-5, VFL, 200/400X FBP Probe, Hardwired to HD3 Display. Tips: SC, LC, MTP,
U25, U12, cleaning materials, patch cords and deluxe carrying case.
FIT-S005
Professional - OLS-6, OLP-8, VFL, 200/400X FBP Probe, HD3 Display. Tips: SC, LC, FC, ST, SC-APC, U25M,
U25MA, U12M, cleaning materials, patch cords and deluxe carrying case.
FIT-S005-NT
Professional (No test) - 200/400X FBP Probe, HD3 Display. Tips: SC, LC, FC, ST, SC-APC, U25M, U25MA,
U12M, cleaning materials, patch cords and deluxe carrying case.
Ordering Information
FFL-100 Visual Fault Locator
The Visual Fault Locator (VFL) is a ruggedized, handheld tool used to locate breaks and/or damage in optical fibers.
It employs a powerful red laser designed to couple to optical connectors, providing the ability to locate areas in a
fiber that have been damaged, broken, or tightly bent. The laser light will escape from the fiber at the exact site of
the damage, causing the cable sheath to illuminate red. The FLASH control allows for two options: continuous
illumination or flashing mode. The VFL (FFL-100) is fully assembled and comes with a soft-sided carrying case. In-
cluded are 2 batteries with > 80 hours of continuous-mode battery life. It is equipped with a 2.5 mm interface for
compatibility with connectors such as SC, ST, and FC, while the 1.25 mm adapter interface (included) enables
compatibility with small form-factor connectors such as LC and MU.
IBC Brand Connector Cleaners
IBC™ brand cleaners are dry cloth cleaners specifically designed to clean either side of a fiber connection. For
cleaning connectors behind a bulkhead, simply insert the device into the bulkhead until a click sound is heard.
For cleaning patch cords, the dust cap acts as an adapter to receive the connector ferrule. These tools are simple to
use and highly effective at removing oil and dust contaminants.
Micro Care Cleaning Supplies
FCC2™ optical-grade solvent is designed specifically for cleaning optical connectors. Electrically conductive, this
solvent is ideal and effective at removing stubborn forms of debris by dissipating static charges that bind particulate
to connector end faces. Ideal for wet-to-dry cleaning procedures, this fast-drying solvent is nonflammable, nontoxic,
noncorrosive, and safe to use.